Recently added item(s)
Cart Subtotal
$99.95
Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
With side knobs borrowed from the legendary Minion DHF, but widened to provide more support, the DHR II corners like no other.
The center tread features ramped leading edges to improve acceleration and sipes to create a smooth transition when leaning the bike. Paddle-like knobs on the center tread dig in under hard braking and help keep the bike under control.
•Dimensions: 29 x 2.5
• Casing: Downhill (2×60 TPI)
• Compound:3C MaxxTerra
•Tubeless Ready: Yes
The revered Silverado saddle has been updated with a shorter 265mm length and new Fusion Form base technology to provide the same comfort you know and love, but with a modern look!
The Silverado optimizes efficiency in a forward-leaning pedaling position with a fiber percentage similar to the recently released Gravelier saddle. Fusion Form also allows the padding to be recessed into the base, which provides a sleek aesthetic without actually reducing overall padding thickness.
- ChromAlloy rails
- 142 mm wide
- 270 grams
This is the most advanced carbon fiber handlebar on the market and a rider favourite for all disciplines from trail to DH. Get industry-leading compliance and strength with the OneUp V2 Carbon Handlebar, so you can ride harder for longer.
• Clamp: 35mm
• Rise: 50mm
• Width: 800mm
$246.00
ULTRA LIGHTWEIGHT XC WEAPON
32 Step-Cast’s pioneering lower leg shape isn’t just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. • Wheel size: 29” • Travel: 100mm • Damper: FIT4
More range, more riding.
Range anxiety? Not on the Turbo Levo SL. Our compact and discreet SL Range-Extender Battery provides up to 40 additional miles of mountain-flattening power to complement the up to 80 miles of range from the Turbo Levo SL’s internal battery.
• 160Wh capacity delivers up to one additional hour of riding.
• Compatable with Turbo SL Bikes
• LED charge lever indicator
• SL Range extender cable sold separately
The V2.1 Dropper Rebuild Kit is an updated rebuild kit for the OneUp V2 Dropper Post with an updated midcap assembly and new ultra-low friction SKF® seals.
Includes:
$42.00
- 1 x SKF® Midcap Assembly
- 1 x Upper Bushing
- 1 x Lower Bushing
- 3 x Brass Pins
Full Replacement Cage Assembly Kit for the SRAM Transmission rear derailleurs.
Only compatible within the SRAM Transmission group
Includes:
- Outer and Inner Cages
- Damper
- Pulley Wheels
Power of locked-in flats.
Turbine is the most concave flat pedal designed for climbing, mobbing descents and tackling the most demanding terrain where riders are all-in on grip. Covered by our Lifetime Warranty inclusive of crashes and available in seven colors. The most locked-in feel you can get on traditional flat pedals,for when good grip just isn’t good enough.
• Chromoly steel Axle
• 6061 aluminum body, steel pins
• Lifetime warranty
A pedal designed to help you go as fast as you possibly can. The PD-M9100’s low platform height and wide bearing placement create a stiff and stable pedal for optimal pedaling efficiency and power transfer. Slimmer axle housing and an open design shed mud and muck for trustworthy performance in all race conditions.
• 314g per pair. • Chrome-molly spindle • SM-SH51 SPD Cleats Included
Material: aluminum
Compatibility: Yeti SB100, SB130, SB150, SB4.5, SB5.5, SB6, SB5+
The HG701-11 chain is directional and features SIL-TEC treatment on the roller link plate and pin link plate for increased durability. It is compatible with 11-speed road, MTB, and E-BIKES thanks to its reinforced design.
- Smooth and reliable shifting performance
- Directional 11-speed chain
- More efficient and silent, less maintenance
- SIL-TEC surface treatment
- MTB, Road, E-BIKE 11-speed compatible
- Reinforced chain for E-BIKE use
- New chain plate dimension
- Weight: 257g (114Links)