Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
The PC-X1 chain comes from a long line of dependable, lightweight chains that are built for toughness. Designed with SRAM’s trusted XX1 geometry, the PC-X1 features solid pin construction, 11-speed PowerLock® and smooth, efficient shifting that you can count on every time out.
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market. From the outside to the inside, we’ve sweated the details of the MK5 to bring you the ultimate flat pedal.
For the first time ever, our legendary Code brake now wears the Ultimate crown. The full-powered stopper features a new technology to improve your cockpit aesthetic: Stealth. The all-new lever body design brings the hose closer to the bar, allowing for a sleeker, more modern ride. The proven internals remain the same, with SwingLink driving our signature feel. And for unrivaled ease of customization, Code Ultimate features tool-free Reach and Contact Point Adjust. To top it all off, a carbon blade joins our Lever Pivot Bearing technologies, so feel will remain smooth. Our best just got better.
FEATURES
– Aluminium trigger designed for a positive lever feel.
– Includes bar clamp
– MatchMaker™X compatible.
– Master GX Eagle™ master colorway to match all cassette and chain colors as part of Eagle™ Colorsystem.
The GX Eagle Transmission (T-Type) chain is the strongest SRAM has ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top. In addition to this shape maximizing shifting performance and upgrading the aesthetics of any bike, it is developed specifically for the added torque loads of E-MTB thanks to its solid pins that give it incredible strength.
KWT Polyfilm rim tape is an excellent tape that is comparable to those of larger brands at a fraction of the cost!
| Part Number | 910-21-333 |
| Rake | 44mm |
| Chassis | Step-Cast |
| Wheelsize | 29in |
| Series | Factory |
| Travel | 100mm |
| Damper | Grip SL |
| Damper Controls | Psh-Lk |
| Axle | Kabolt SL 110 |
| Steerer | 1.5 T |
