Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
Power of locked-in flats.
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market.
ULTRA LIGHTWEIGHT XC WEAPON
32 Step-Cast’s pioneering lower leg shape isn’t just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. • Wheel size: 29” • Travel: 100mm • Damper: FIT4
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish
New Name, familiar shape.
Praxis seamlessly merges tradition with modernity, bringing back the beloved Podium shaped pedal. With blessings from Gamut's founders, this revival isn't just about its return; it signifies our dedication to honoring the history of this iconic pedal design.
DESIGN
With meticulous attention to detail, we have preserved the essence of the original Podium pedal so cherished by riders, while incorporating a variety of updates for today's trail riding
LOW PROFILE
With three Enduro bearings and an Igus bushing, this design ensures a low-profile configuration, enabling smooth rotation on a heat-treated 4140 chromoly axle
- 1 x SKF® Midcap Assembly
- 1 x Upper Bushing
- 1 x Lower Bushing
- 3 x Brass Pins
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
A pedal designed to help you go as fast as you possibly can. The PD-M9100’s low platform height and wide bearing placement create a stiff and stable pedal for optimal pedaling efficiency and power transfer. Slimmer axle housing and an open design shed mud and muck for trustworthy performance in all race conditions.
• 314g per pair. • Chrome-molly spindle • SM-SH51 SPD Cleats Included
- ChromAlloy rails
- 142 mm wide
- 270 grams
