Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle™ derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52t cassettes, it’s also backwards compatible for the 10-50t versions. Giving riders choice, because that’s how it should be. Finished with the new GX Eagle™ master colorway – to compliment any cassette and chain colorway a rider wants from the Eagle™ Colorsystem. Further proof that the GX Eagle™ derailleur is there for one thing – to do the job.
• Compatible with sram eagle ecosystem
• Cable operated
Power of locked-in flats.
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market.
The PC-X1 chain comes from a long line of dependable, lightweight chains that are built for toughness. Designed with SRAM’s trusted XX1 geometry, the PC-X1 features solid pin construction, 11-speed PowerLock® and smooth, efficient shifting that you can count on every time out.
• 11 speed •118 links •259g •powerlock connector
Some riders test their limits more than others. For these riders, the GX Eagle DUB crankset allows them to go all in, every day they ride. The best aluminium crankset we make, engineered to deliver consistent performance every ride. Featuring our X-SYNC 2 tooth profile chainring for complete chain control. Each tooth's thickness is toleranced and controlled to work seamlessly with the chain's inner and outer links.
•Spindle Size: DUB 28.9mm •Speeds: 11/12 • Materials: 7000 series aluminium arms, aluminium spindle, aluminium chainring *chainring not included
More range, more riding.
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish