Recently added item(s)
-
IN STOCK
Chain SRAM PC XX1 Eagle 12spd Rainbow
1 x $158.00
Cart Subtotal
$158.00
Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
KWT Polyfilm rim tape is an excellent tape that is comparable to those of larger brands at a fraction of the cost!
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish
$119.00
The HG701-11 chain is directional and features SIL-TEC treatment on the roller link plate and pin link plate for increased durability. It is compatible with 11-speed road, MTB, and E-BIKES thanks to its reinforced design.
- Smooth and reliable shifting performance
- Directional 11-speed chain
- More efficient and silent, less maintenance
- SIL-TEC surface treatment
- MTB, Road, E-BIKE 11-speed compatible
- Reinforced chain for E-BIKE use
- New chain plate dimension
- Weight: 257g (114Links)
Power of locked-in flats.
Turbine is the most concave flat pedal designed for climbing, mobbing descents and tackling the most demanding terrain where riders are all-in on grip. Covered by our Lifetime Warranty inclusive of crashes and available in seven colors. The most locked-in feel you can get on traditional flat pedals,for when good grip just isn’t good enough.
• Chromoly steel Axle
• 6061 aluminum body, steel pins
• Lifetime warranty
LIGHT DUTY TRAIL TIRE THAT ROLLS FAST IN DRY CONDITIONS
The aggressive tread combined with a high volume casing make the Ardent a great front and rear combo on a trail bike, or as a rear tyre on an enduro bike. If using on an enduro bike, match it up with either a Maxxis Minion DHF, DHR or Highroller 2. The ramped centre knobs offer great rolling speed while their shape allows them to be very effective at braking and climbing. The Ardent also offers oversized and stepped side knobs for multiple gripping edges when cornering.- Tubless Ready
- Size: 27.5 x 2.25
- Great all-rounder, a real “Jack of all trades”
- Works great as a front or rear on a trail bike
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market.
The V2.1 Dropper Rebuild Kit is an updated rebuild kit for the OneUp V2 Dropper Post with an updated midcap assembly and new ultra-low friction SKF® seals.
Includes:
$42.00
- 1 x SKF® Midcap Assembly
- 1 x Upper Bushing
- 1 x Lower Bushing
- 3 x Brass Pins
The PC-X1 chain comes from a long line of dependable, lightweight chains that are built for toughness. Designed with SRAM’s trusted XX1 geometry, the PC-X1 features solid pin construction, 11-speed PowerLock® and smooth, efficient shifting that you can count on every time out.
• 11 speed •118 links •259g •powerlock connector
Enduro has evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect.
- Material: Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Hardware: Stainless Steel
- Lengths: 35mm, 42.5mm and 50mm
- Weight: 35mm 138g, 42.5mm 152g , 50mm 160g
Of all the components that make up a mountain bike drivetrain, the shifter doesn’t exactly get a lot of spotlight time. But as the rider’s literal command and control centre, the GX Eagle™ shifter is more than worthy of recognition. With intuitive thumb actuated triggers, the positive feel gives the right rider input to make shifts crisp and discernible every time. What’s more, its already legendary reliability continues for all-day epics, and all-time experiences.
• Aluminium trigger designed for a positive lever feel.
• Includes bar clamp
• MatchMaker™X compatible.
The revered Silverado saddle has been updated with a shorter 265mm length and new Fusion Form base technology to provide the same comfort you know and love, but with a modern look!
The Silverado optimizes efficiency in a forward-leaning pedaling position with a fiber percentage similar to the recently released Gravelier saddle. Fusion Form also allows the padding to be recessed into the base, which provides a sleek aesthetic without actually reducing overall padding thickness.
$125.00
- ChromAlloy rails
- 142 mm wide
- 270 grams
A pedal designed to help you go as fast as you possibly can. The PD-M9100’s low platform height and wide bearing placement create a stiff and stable pedal for optimal pedaling efficiency and power transfer. Slimmer axle housing and an open design shed mud and muck for trustworthy performance in all race conditions.
• 314g per pair. • Chrome-molly spindle • SM-SH51 SPD Cleats Included
This is the most advanced carbon fiber handlebar on the market and a rider favourite for all disciplines from trail to DH. Get industry-leading compliance and strength with the OneUp V2 Carbon Handlebar, so you can ride harder for longer.
• Clamp: 35mm
• Rise: 50mm
• Width: 800mm
$246.00