Recently added item(s)
Cart Subtotal
$479.00
Showing 337–360 of 654 results
$199.00
Read more
A NEW HOPE
It’s a sad fact of life: your moving components on your bike will have to be replaced in order to keep your bike working properly. Some components will wear out after 1000 miles, and some will last much longer. The Hope Pro 4 Shimano Micro Spline Freehub Body is designed to replace the freehub body on your Hope Pro 4 hubs. It is only compatible with Shimano Micro Spline cassettes.
FEATURES
- Replaces your freehub body on your Hope Pro 4 hubs
- Compatible with Shimano Micro Spline cassettes
- Available for 12mm thru-axles
$179.00
Add to cart
Switching to Shimano from SRAM, but want to keep your fabulous Hope hubs? You’ll need a new freehub, and these fit the bill perfectly! Standard Splined for Shimano compatible cassettes, and SRAM XD Driver for SRAM compatible cassettes.
$269.00
Read more
At The Center Of It All
Cast your eyes upon your new favorite component–the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery fast speed by way of solid, smart design. • Spacing: Boost - 15 x 110 • Brake interface: 6 Bolt • Bearings: large 6902 • Spoke type: J bend • Warranty: Lifetime
$479.00
Add to cart
AT THE CENTER OF IT ALL
Cast your eyes upon your new favorite component–the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery fast speed by way of solid, smart design. Get Power to the Pedal with a 60 tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power. • Spacing: Boost – 12 x 148 with XD driver • Brake interface: 6 Bolt • Bearings: large 6902 • Spoke type: J bend • Warranty: Lifetime
$479.00
Read more
AT THE CENTER OF IT ALL
Cast your eyes upon your new favorite component–the infinitely adaptable, fully tuned-and-dialed hub of choice for your custom wheel build. The Vault has almost instant power transfer for slippery fast speed by way of solid, smart design. Get Power to the Pedal with a 60 tooth drive ring, 6 pawls, acting in 2 groups of 3, for 120 points of engagement. The result– almost instant transfer of power. • Spacing: Boost – 12 x 148 with XD driver • Brake interface: 6 Bolt • Bearings: large 6902 • Spoke type: J bend • Warranty: Lifetime
$1,299.00
Add to cart
Chris King Boost Centerlock hubs are designed as precision mountain tools. We use one-piece solid axles to provide a stiff hub that will help your suspension perform better and drive every watt of power into the dirt. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals, and a threaded driveshell seal ring.
• Front: 15x110mm
• Rear: 12x148mm
• Rotor mount: Centerlock
• Driver: XD
$1,199.00
Read more
Our most refined system yet.
Designed specifically for trail, enduro, and downhill riders with the strength to handle full-power ebikes, Hydra2 blends precision machining, local manufacturing, and the rider driven ethos you’ve come to expect from Industry Nine.
PRECISION EVOLVED
We listened to your feedback from over 100,000 Hydra hubs ridden worldwide. Through relentless refinement Hydra2 emerges as the most versatile, high performance hub and wheel system available today.
Scalloped flanges on Hydra2 j-bend hubs increase overall strength, and remove excess material for a lighter, stronger hubshell.
With .41 degree engagement and 60% less coasting drag than Hydra, Hydra2 provides intantaneous response and descends faster than ever.
Rider confidence begins with knowing your components can keep up with every challenge. After years of rigorous development and extensive real-world testing, we’re proud to say Hydra2 is engineered to reliably perform in the toughest riding conditions.
65% Thicker Axle
Our new axle design is 65% thicker with an improved stress washer design.
$1,199.00
Add to cart
The most refined system yet.
Designed specifically for trail, enduro, and downhill riders with the strength to handle full-power ebikes, Hydra2 blends precision machining, local manufacturing, and the rider driven ethos you’ve come to expect from Industry Nine. • 15 × 110mm Front (boost) and 12× 157mm Rear (super boost) • 6 bolt • Durable 6903 bearings • 870 Points of engagement
$899.00
Select options
Industry Nine Classic hubs are the heart of your wheelset
Every Classic mountain hub is made start to finish in our Asheville, NC machine shop. From turning and milling bar stock 7075-T6 aluminum for shells, axles and encaps, wire EDM cutting A2 tool steel for pawls and driverings, to our own in-house anodization lab, every step of design, engineering, manufacturing and assembly is done on premises to our exacting standards. Hydra Classic mountain hubs are loaded with features every rider will appreciate such as revolutionary 0.52° engagement, generously low weights and an intuitive layout that can be serviced without any proprietary tools.- Spoke holes: 32h
- Rotor attachment: 6 Bolt
- Freehub: MS, HG or XD
- Spacing: 15x110mm & 12x148mm
$209.00
Add to cart
The RANGER™ 3 is a go-to hydropack for fast and 1-3 hours racing with a slim-profile fit.
Carry your essentials in the removable tool pocket while training then just pop it off to drop the weight for racing. Its smart and its quick!
AWARD WINNING TECHNOLOGY
NDM™, No Dancing Monkey is our award winning, patented suspension harness technology that gives you the perfect fit, with zero bouncing on your back. The “edge” is the elastic 4-point straps that allow you to snug the pack really tight, without it affecting your breathing capacity or freedom of movement.
..
SPECIFICATIONS
- 3L cargo capacity
- 2,0L Elite™ hydration system Included
- Weight: 425g *ex. bladder
- PATENTED NDM™ harness technology
- Quick-removable organizer compartment (wide opening)
- Water resistant (Not waterproof) smartphone pocket
- Twin port exit for tube from H2O-compartment
- Tube port compatible with HHF kit
- Multi size adjustable: M-XL (Approx. Chest 84-120cm)
- Unisex fit
$8,490.00 – $12,990.00
Read more
HD6
The HD6 is the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
The 29″ front wheel, bolstered by 180mm of travel, assures stability, whereas the 27.5″ rear wheel allows for additional maneuverability. The 165mm of travel skillfully manages any fallout. With a 64 degree head tube angle (one degree slacker than the current Ripmo), a BB height similar to Mojo HD5, and chainstay length identical to the current Ripmo (despite the 27.5″ rear wheel), the bike maintains an equilibrium between agility and stability.
In order to place every size rider in the same position over the rear wheel, the HD’s seat tube angles get steeper as frame size increases. With four sizes, this would have resulted in larger jumps in reach, so we added a fifth size. The smaller increments across five sizes means that you can find just the right size. We encourage riders to choose their bike size based on their desired reach and top tube measurements.
Our upper link suspension layout is progressive enough to be sensitive off the top, yet supportive enough for the biggest hits. It is also compatible with all coil shocks, for those longer race stages that can tax air shock performance.
The suspension layout may be new, but it’s still DW-Link. The inherent efficiency means you don’t need an overdamped shock to climb well. Less shock damping allows the wheels to stay planted on the ground, providing more traction and that hover-bike feel that our frames are known for. The HD6 climbs with a finesse that defies its enduro race pedigree.
Our custom tuned front and rear suspension feature extra light high speed compression and rebound damping to deliver unparalleled traction. This allows the wheels to flutter through rough terrain like a trophy truck storming through a set of whoops. To learn more about our Traction Tune philosophy, click here.
Tired of buying bearings each season? So were we. That’s why we’ve strategically employed bushings where they’re most effective and bearings elsewhere. The IGUS bushings in our lower link are not only lighter and stiffer, they’re virtually maintenance-free. We believe so strongly in them, we back them with free lifetime replacement.
All our bikes are built from the highest grade materials and optimized for the best strength, weight, stiffness, and ride performance — no matter how much you spend. The HD6 frame is sub 6 lbs without shock and our complete Enduro ready builds weigh as little as 32 lbs.
Bikes that look pretty on the outside should look pretty on the inside. We use carbon fiber tubes molded within each frame. Push the cable in, watch it pop out — a beautiful moment indeed.
A thick rubber downtube protector deflects debris, while our chainstay protector features thick raised sections to help dampen chain slap noise. And our simple-yet-elegant linkage protectors stop mud and rocks thrown by the tire, keeping your beautiful bike beautiful.
If it’s our fault, we’ll fix it. Simple as that.
$39.00
Add to cart
Material: aluminum
Compatibility: Ibis Mojo HD, HD-R, SL_R, Tranny 29, HD3, Ripley, Ripley LS, Mojo 3, Ripmo
$210.00
Add to cart
Industry Nine’s A-Series stems are crafted from aluminum billet into a svelte design of equal form and function. Using practices honed in our machine shop over a decade of CNC manufacturing, we offer the rider another unyielding Industry Nine component.
Material: US Sourced 7075 Aluminium
Weight: 32mm = 128g, 40mm = 135g, 50mm = 150g
Clamp diameter: 35mm
$435.00
Select options
THE ESSENTIAL SHELL FOR WET WEATHER RIDING.
The TURQ Commit Jacket is now the essential shell for wet weather riding. Our experience riding in other jackets lead us to choose what we believe is simply the best in active waterproof performance. Constructed with Toray’s new, electrospun stretch membrane this three-layer waterproof fabric won’t swamp you out when you’re giving it your all. We’ve built in multiple features to let you shed heat — strategically placed hand pockets perform double duties as vents and the two-way front zipper allows for maximum ventilation and access to bib pockets. Topping off this piece is an adjustable, helmet compatible hood that works on and off the bike.
KEY FEATURES
- TORAY WATERPROOF 3 LAYER 90G/M2 STRETCH WOVEN FABRIC WITH ELECTROSPUN MEMBRANE
- SEAM TAPED FOR FULL WATER PROTECTION
- DURABLE WATER REPELLENT FINISH SHEDS MOISTURE
- TWO WAY WATERTIGHT YKK AQUAGUARD FRONT ZIPPER
- TWO ZIPPED MESH-LINED HAND POCKETS DOUBLE AS VENTS
- ADJUSTABLE HOOD FITS OVER TRAIL HELMETS
- ADJUSTABLE HOOK AND LOOP CUFFS SEAL OUT ELEMENTS
- ELASTIC DRAWCORD AT WAIST
- 100% NYLON
$75.00
The ultimate, shop-quality bicycle chain breaker. Incredibly robust steel body, ergonomic operation, and classic wood handle. Innovative, adjustable design works with most 8-12 speed bike chains. Hardened steel breaker pin features extra bike chain pin stored in handle.
Add to cart
$70.00
Add to cart
Durable and compact chrome plated ratchet tool designed for bicycles. Fine tooth ratchet with reversing lever and a fixed opening on opposite end. Tool selection optimised for road, gravel and mountain bikes. Super hard CRV (chrome vanadium) bits. Custom, machined aluminium extension adapter with laser etched logo. Integrated magnet holds tool bits in place. Ratchet Kit comes in a compact, soft shell carrying case.
WEIGHT: 140g
TOOL BITS: 2, 2.5, 3, 4, 5, 6, 8mm
T10, T25, T30
$79.00
Add to cart
Lightweight, shop quality shock pump.
Full CNC-machined aluminum construction. Maximum quality and durability. Ergonomic handle enhances pumping comfort. Diaphragm gauge offers excellent accuracy; max. 400 psi (27.5 bar).
Tough composite matrix case houses gauge and improves grip. Zero-loss chuck design unthreads from the shock after valve pin seals.
$45.00
Add to cart
Machined aluminium construction with removable handle and integrated magnet to hold tool bits in place. Storage for tool bits in the handle. Includes strap for on-the-bike mounting.
Lezyne’s Storage Drive is a minimalist tool that’s designed to be a quick draw for common trailside adjustments and maintenance such as saddle height, stem and handlebar positioning, and cleat or rotor bolt tightening. Weight is a mere 77 grams and it comes with a neoprene reinforced bike mount strap so you can discretely secure it to your seat tube, seat post or most anywhere else you desire.
WEIGHT: 77g
TOOL BITS: Hex 3, 5, 6mm, T25, T30
$60.00
Machined aluminum construction with removable handle. Integrated magnet holds bits in place. Includes soft shell carrying case with storage cutouts and extra pocket.
Add to cart