Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
The V2.1 Dropper Rebuild Kit is an updated rebuild kit for the OneUp V2 Dropper Post with an updated midcap assembly and new ultra-low friction SKF® seals.
Includes:
$42.00
- 1 x SKF® Midcap Assembly
- 1 x Upper Bushing
- 1 x Lower Bushing
- 3 x Brass Pins
Microspline Freehub bodies for DT Swiss will enable you to convert your DT Swiss hubs from Shimano HG and SRAM XD to Shimano Microspline
- Fits DT 180, 240, 350 & 440 Hubs
- 12×142/148 End Cap
- Replacement freehub body
- Ratchet EXP and ratchet freehub bodies are NOT interchangeable
KWT Polyfilm rim tape is an excellent tape that is comparable to those of larger brands at a fraction of the cost!
The GX Eagle Transmission (T-Type) chain is the strongest SRAM has ever made. Specifically engineered to optimize Eagle Transmission, this all-new T-Type design features a unique flat top. In addition to this shape maximizing shifting performance and upgrading the aesthetics of any bike, it is developed specifically for the added torque loads of E-MTB thanks to its solid pins that give it incredible strength.
• Works with entire sram T-Type eco system
• E-bike approved
• Chrome Hardened, Nickel plated links
$86.00
The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings.
• Proprietary design ensures smooth shifting and strength
• Extended inner plate improves chain engagement and retention
• Shorter shift times and less pedaling shock
• Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish
$119.00
Material: aluminum
Compatibility: Yeti SB100, SB130, SB150, SB4.5, SB5.5, SB6, SB5+
The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. Includes cable and housing. It's the easiest way to upgrade any mechanical dropper.
$109.00
- 1x Remote body
- 1x Black thumb cushion (colours sold seperately)
- Cable, housing, cable end & barrel end
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish
Enduro has evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect.
- Material: Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Hardware: Stainless Steel
- Lengths: 35mm, 42.5mm and 50mm
- Weight: 35mm 138g, 42.5mm 152g , 50mm 160g
This is the most advanced carbon fiber handlebar on the market and a rider favourite for all disciplines from trail to DH. Get industry-leading compliance and strength with the OneUp V2 Carbon Handlebar, so you can ride harder for longer.
• Clamp: 35mm
• Rise: 50mm
• Width: 800mm
$246.00
Shimano’s XT/Saint RT86 Ice-Tech 6-Bolt Disc Brake Rotor provides exceptional stopping performance in all weather conditions. Featuring a triple-decker construction of stainless steel and alloy 3-layer to speedily disperse the heat generated from your ride, this mountain bike disc brake rotor has an outstanding lifespan and produces less noise than your average, run-of-the-mill disc rotor.
$69.00 – $89.00
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle™ derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52t cassettes, it’s also backwards compatible for the 10-50t versions. Giving riders choice, because that’s how it should be. Finished with the new GX Eagle™ master colorway – to compliment any cassette and chain colorway a rider wants from the Eagle™ Colorsystem. Further proof that the GX Eagle™ derailleur is there for one thing – to do the job.
• Compatible with sram eagle ecosystem
• Cable operated