Recently added item(s)
Cart Subtotal
$1,099.00
Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
Grippler Grips are made with Race Face’s own special blend of rubber that’s tough as nails and soft to the touch. A directional ramped grip profile under the fingers helps to eliminate slippage no matter how sloppy the conditions.
$45.00
The revered Silverado saddle has been updated with a shorter 265mm length and new Fusion Form base technology to provide the same comfort you know and love, but with a modern look!
The Silverado optimizes efficiency in a forward-leaning pedaling position with a fiber percentage similar to the recently released Gravelier saddle. Fusion Form also allows the padding to be recessed into the base, which provides a sleek aesthetic without actually reducing overall padding thickness.
$125.00
- ChromAlloy rails
- 142 mm wide
- 270 grams
The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings.
• Proprietary design ensures smooth shifting and strength
• Extended inner plate improves chain engagement and retention
• Shorter shift times and less pedaling shock
• Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings
The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. Includes cable and housing. It's the easiest way to upgrade any mechanical dropper.
$109.00
- 1x Remote body
- 1x Black thumb cushion (colours sold seperately)
- Cable, housing, cable end & barrel end
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market.
ULTRA LIGHTWEIGHT XC WEAPON
32 Step-Cast’s pioneering lower leg shape isn’t just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. • Wheel size: 29” • Travel: 100mm • Damper: FIT4
Microspline Freehub bodies for DT Swiss will enable you to convert your DT Swiss hubs from Shimano HG and SRAM XD to Shimano Microspline
- Fits DT 180, 240, 350 & 440 Hubs
- 12×142/148 End Cap
- Replacement freehub body
- Ratchet EXP and ratchet freehub bodies are NOT interchangeable
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
A pedal designed to help you go as fast as you possibly can. The PD-M9100’s low platform height and wide bearing placement create a stiff and stable pedal for optimal pedaling efficiency and power transfer. Slimmer axle housing and an open design shed mud and muck for trustworthy performance in all race conditions.
• 314g per pair. • Chrome-molly spindle • SM-SH51 SPD Cleats Included
Enduro has evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect.
- Material: Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Hardware: Stainless Steel
- Lengths: 35mm, 42.5mm and 50mm
- Weight: 35mm 138g, 42.5mm 152g , 50mm 160g
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish
$119.00
Material: aluminum
Compatibility: Yeti SB100, SB130, SB150, SB4.5, SB5.5, SB6, SB5+
The PC-X1 chain comes from a long line of dependable, lightweight chains that are built for toughness. Designed with SRAM’s trusted XX1 geometry, the PC-X1 features solid pin construction, 11-speed PowerLock® and smooth, efficient shifting that you can count on every time out.
• 11 speed •118 links •259g •powerlock connector