Product Description
$139.00
CushCore PRO fits tire widths 2.1″ to 2.6″ and inner rim widths 22mm to 35mm.
Includes (1) CushCore tire insert, (1) 44mm CushCore green presta air valve, (2) rim stickers
Be the first to review “CushCore PRO Tyre Insert 27.5 x 2.1 – 2.6″ Single”
You must be logged in to post a review.
Related Products
A tire that feels most at home riding up front while smashing turns, holding grip on off-camber sections, finding that last bit of traction on wet roots, dusty rocks & nasty turns.
Progressive block layout limits dirt buildup maintaining performance across a wide range of conditions.
Who rides this tire.
Your bike of choice is a Downhill, Enduro or rowdy Trail rig. You eat/sleep loose turns, berms and full-on terrain.
Where does this tire perform best.
Best suited to your front wheel. A broad range of conditions from loose dust to wet loam. Most at home on challenging terrain where high levels of control are required.
A tire that feels most at home riding up front while smashing turns, holding grip on off-camber sections, finding that last bit of traction on wet roots, dusty rocks & nasty turns. Progressive block layout limits dirt buildup maintaining performance across a wide range of conditions.
Troy Brosnan’s Go-Fast Signature Tyre
Troy wanted a “unicorn” of a tyre – a center tread design that carried speed easily but with edge blocks worthy of world-class cornering speed. Using our Rekon, Minon DHF, and High Roller II tread patterns as a starting point, Troy and our engineering team began development on the Dissector during the 2018 World Cup season. The center knobs are all heavily ramped to minimize drag, but retain sharp, flat edges along their backs to provide strong braking traction. Small sipes give the knobs additional flexion, increasing their surface area during braking and aiding the transition to the edge blocks when cornering. C-shaped edge blocks alternate between being closer and farther away from the center line of the tyre. This pattern reduces vagueness when transferring from the center tread to the cornering tread. A distinct channel along either side of the center knobs – along with ample spacing between all lugs – helps to clear debris.- Recommended as a rear tyre
- Ideal for dry, fast tracks and bike parks
- Wide Trail (WT) casing is optimized for 30-35mm inner rim widths
A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections.
Who rides this tire.
Your bike of choice is a Downhill, Enduro or trail rig, you eat/sleep loose turns, berms and full-on terrain.
Where does this tire perform best.
Best suited to your rear wheel. A broad range of conditions from loose dust to wet loam. Most at home on Downhill & Enduro terrain, or rowdy trails.
The Rekon is an aggressive trail tire inspired by the Ikon
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing conditions. The tread design features ramped center knobs to reduce rolling resistance, while tall, arch-supported side knobs provide ample braking and cornering grip. Taller, meatier, and more aggressive than the Newton, the Newton ST ups the ante when front grip and loose terrain traction is a priority.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton ST EN is lightweight with sturdy tread blocks. The Newton ST DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
| Size | ETRTO | Tech | Weight (g) | PSI | Type |
| 29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 982 | 25-50 | Tubeless Complete |
The New GEN3L material has been developed with a clear objective: increasing the level of rim protection and extending the life of the insert itself, without negatively impacting the insert’s weight, which is always a top priority for us.
The new material has an enormous capacity to absorb impact, and thanks to the addition of an internal reinforcement laminate its structural rigidity and resistance to deformation and stretching have been improved to 200%.
With the new Panzer EVO shape, the total volume of the insert has been reduced by 20%, protection in the area with the highest exposure to impact has been increased, and maximum adjustment of the insert to the rim has been achieved without negatively impacting on ease of installation.
These significant modifications entail an increase in the volume of air inside the tyre, allowing greater freedom in terms of tyre deformation.
Drive focused tread delivers speed and durability with tracking performance. Rear specific
Featuring a fast-rolling center tread, firmly supported side knobs, and advanced compounds, the Newton provides surefooted traction in a wide range of conditions. As befitting a tire named after the man who defined the laws of gravity and motion, the Newton is the enduro and downhill rider’s choice; it’s the tire to reach for when the terrain gets steep.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton EN is lightweight with sturdy tread blocks. The Newton DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
| Size | ETRTO | Tech | Weight (g) | PSI | Type |
| 29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 990 | 25-50 | Tubeless Complete |
HANS DAMPF
HANS DAMPF HAS EVERYTHING TO INCREASE ENDURO FUN. For stunning handling and the highest puncture protection on demanding trails – ascent as well as descent.
29″ X 2.35″ | EVO | SUPER TRAIL | TLE | ADDIX SOFT
WHAT IS CUSHCORE?
CushCore is an engineered foam insert that mounts inside a mountain bike tire. It divides the inner volume of the tire in half, with air underneath the tread and the CushCore insert next to the rim.
Cushcore absorbs impacts, reduces vibration, and adds lateral stability to the tire. These characteristics translate to a more controlled, comfortable, and faster ride.
This system is designed to be used with tubeless-ready or tubeless converted mountain bike rims and tires. CushCore is compatible with tubeless tire sealants.
A specially designed tubeless air valve is included with each insert. The air valve allows air to move through the valve without becoming obstructed by the insert.
The standard by which all tyres are judged.
- Ramped, directional tread design
- Large cornering blocks
- Single-ply, DoubleDown, and DH casings available
- 3C MaxxTerra, 3C MaxxGrip, and Super Tacky available on select models
- Wide trail (WT) casing specs are optimized for 30-35mm inner width rims
With a tread design that deftly balances rolling speed with braking and cornering traction, it’s hard to find fault with the Minion DHF. That’s probably why it’s one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs. The Minion DHF is available in trail, enduro, and downhill specs.
Scorpion™ ENDURO S
Size: 29×2.6
Structure: HardWALL
The tall profile and widely spaced tread pattern cuts into and grips any kind of loose or soft terrain.
The Scorpion™ Enduro S is the best choice for any Enduros with soft terrain where grip and reliability are key factors.
With side knobs borrowed from the legendary Minion DHF, but widened to provide more support, the DHR II corners like no other.
- Single, dual compound, 3C MaxxTerra, 3C MaxxGrip, or Super Tacky options
- EXO, EXO+, DoubleDown (2×120 TPI), or Downhill (2×60 TPI) casing options
- Wide Trail (WT) sizes optimized for 35mm inner width rims
- Select specs are Tubeless Ready (TR), confirm in table below
Reviews
There are no reviews yet.