Showing 577–600 of 654 results
$99.00
Add to cart
Drive focused tread delivers speed and durability with tracking performance.
A tire that is at its best bringing up the rear while sprinting out the start hut of your race run, as you attack those loose off camber sections, hold the line on rocky chutes and pinballing down rock sections.
• Dual Ply
• 29 x 2.4
• Rear specific
$39.00
Add to cart
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing conditions. The tread design features ramped center knobs to reduce rolling resistance, while tall, arch-supported side knobs provide ample braking and cornering grip. Taller, meatier, and more aggressive than the Newton, the Newton ST ups the ante when front grip and loose terrain traction is a priority.
Available in two models: Utilizing an EN casing paired with our R/T rubber compound, the Newton ST EN is lightweight with sturdy tread blocks. The Newton ST DH pairs our most robust casing with our softest RS/T rubber compound for unrivaled durability and traction.
| Size | ETRTO | Tech | Weight (g) | PSI | Type |
| 29×2.4 | 61-622 | EN Ultimate / Dynamic:R/T / M:Wall | 982 | 25-50 | Tubeless Complete |
$49.00
From aggressive trail riding to the demands of downhill racing, the Newton ST delivers consistent cornering bite, predictable braking control and premium performance in ever-changing...
Add to cart
$129.95
Select options
Wrangler MTF is optimized for the front wheel, best suited for use in dry and dusty to rocky and intermediate conditions where the speed is high and the terrain is challenging, such as aggressive trail through to enduro race stages.
Available in 2 options, ElectricDrive and Enduro, to suit gravity focused mid-long travel MTBs and eMTBs. MX inspired tread pattern, with tightly spaced blocks and in-block sipes provide ultimate grip and steering confidence. Goodyear Grip3S compound is soft and slow rebounding, providing bite on any surface for controlled, and accurate descending.
$129.95
Select options
The Wrangler MTR improves rolling speed and harnesses acceleration forces.
Inspired by high-performance MX tires. Block spacing optimized for dry and rocky terrain. Unique block design with sipes maximises grip.
Tread pattern improves rolling speed and manages block distortion. Unique sipe design provides additional biting edges to improve traction. Unique enduro specific casing layup, bead-to-bead and sidewall reinforcement. Soft, slow-rebound Grip3 compound combines with casing structure for balanced traction and durability.
$25.00 – $49.00
Select options
Gravity performance, with a firmer compound than the EVO SL paired with a taller and wider profile the insert sits over and outside the rim bead preventing pinch flats and improving tyre lateral stability.
- application: heavy duty trail (rear only), enduro, downhill, e-bike
- Low weight 90g (29er, per insert)
- 29” 2.35-2.8” hard casing tyres
- For rims with a minimum 26mm internal, max width is 46mm
- Sold separately
- Valves not included
$49.00
Add to cart
The Maxxis Aggressor is designed for high-speed, hard-packed, rocky trails. It works especially well as a rear tire paired with a Minion DHF or Assegai in the front.
- Dual compound
- 60 TPI
- Tubeless Ready (TR)
- EXO Protection
$36.00
Add to cart
LIGHT DUTY TRAIL TIRE THAT ROLLS FAST IN DRY CONDITIONS
The aggressive tread combined with a high volume casing make the Ardent a great front and rear combo on a trail bike, or as a rear tyre on an enduro bike. If using on an enduro bike, match it up with either a Maxxis Minion DHF, DHR or Highroller 2. The ramped centre knobs offer great rolling speed while their shape allows them to be very effective at braking and climbing. The Ardent also offers oversized and stepped side knobs for multiple gripping edges when cornering.- Tubless Ready
- Size: 27.5 x 2.25
- Great all-rounder, a real “Jack of all trades”
- Works great as a front or rear on a trail bike
$36.00
Add to cart
light duty trail tire that rolls fast in dry conditions
The aggressive tread combined with a high volume casing make the Ardent a great front and rear combo on a trail bike, or as a rear tyre on an enduro bike. If using on an enduro bike, match it up with either a Maxxis Minion DHF, DHR or Highroller 2. The ramped centre knobs offer great rolling speed while their shape allows them to be very effective at braking and climbing. The Ardent also offers oversized and stepped side knobs for multiple gripping edges when cornering.- Tubless Ready
- Size: 27.5 x 2.4
- Great all-rounder, a real "Jack of all trades"
- Works great as a front or rear on a trail bike
$119.00
Add to cart
Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.
• 29" x 2.4
• 3C MaxxTerra
• DoubleDown
$99.00
Add to cart
Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.
- 29" x 2.4
- 3C MaxxTerra
- EXO+
$119.95
Select options
Positioning itself between the Assegai and the Shorty in the Maxxis gravity range, the third-generation High Roller combines an open center tread pattern with large, well supported side knobs to withstand extreme cornering forces. It’s a hybrid tread design that provides the soil penetration of a wet weather mid-spike while retaining the cornering control and hard surface traction of a dry conditions tyre.
• Hybrid tread design
• MaxxGrip rubber compound
• 2 x 60 TPI downhill casing
• Tubeless ready
$36.00
Add to cart
The standard by which all tyres are judged.
With a tread design that deftly balances rolling speed with braking and cornering traction, it’s hard to find fault with the Minion DHF. That’s probably why it’s one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs. The Minion DHF is available in trail, enduro, and downhill specs.- Size: 27.5 x 2.3
- Tubeless ready, EXO casing
- Ramped, directional tread design
- Large cornering blocks
$39.00
Add to cart
THE STANDARD BY WHICH ALL TYRES ARE JUDGED.
With a tread design that deftly balances rolling speed with braking and cornering traction, it’s hard to find fault with the Minion DHF. That’s probably why it’s one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs. The Minion DHF is available in trail, enduro, and downhill specs.- Size: 27.5 x 2.3
- Tubeless ready, EXO casing
- Maxx Terra 3C compound
- Ramped, directional tread design
- Large cornering blocks
$74.95 – $89.95
Select options
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
$89.95
Add to cart
The Maxxis Rekon Race is a semi-slick XC race tire that features the lowest profile tread in our XC line. It is a great choice for dry XC trails and short track racing.
- 3c Maxx speed compound
- 120 TPI casing
- EXO sidewall protection
- 25% less rolling resistance
- Tubeless Ready
$79.00
Add to cart
Scorpion™ ENDURO S
Size: 29×2.6
Structure: HardWALL
The tall profile and widely spaced tread pattern cuts into and grips any kind of loose or soft terrain.
The Scorpion™ Enduro S is the best choice for any Enduros with soft terrain where grip and reliability are key factors.
$99.00
Add to cart
BIG BETTY IS BACK! Equipped with everything modern tire technology has to offer. A Downhill and Enduro Allrounder for dry to damp conditions. Big Betty works perfectly on the rear wheel when combined with our much-loved Magic Mary.
- Long supported braking edges for maximum braking traction
- Extremely stable shoulder blocks for outstanding cornering grip
- Open and aggressive tread for excellent grip and self-cleaning
- 29" X 2.4
$109.95
Add to cart
Welcome to the team! Our new Wicked Will has many faces. Whether you set out on an alpine crossing or the fast trail lap, Wicked Will is the right choice and combines like no other light running and grip.
• Fast rolling midsection with ramp-like lugs
• Smooth transition area for maximum control when cornering
• Stable and grippy shoulder knobs for high support in off-camber sections and turns
$49.00
Add to cart
Enduro and e-MTB riders need ultimate versatility in a tire and the Eliminator GRID GRAVITY 2Bliss Ready delivers. Our GRID GRAVITY tires are made with a super tough 2-ply construction for cornering stability and flat protection. Building on this solid base, we added dual compounds with fast rolling T7 compound center tread and the ultimate grip T9 compound shoulder lugs, for a combination of ultimate speed, durability and cornering traction.
- Casing: 60 TPI, Dual-Ply.
- Bead: Foldable.
- Butyl wrapped bead = 2Bliss Ready.
- Compound: GRIPTON® T7/T9.
- 650Bx2.3″, psi 25-50, approximate weight 1240g.
- 650Bx2.6″, psi 20-40, approximate weight 1250g.
- 29×2.3″, psi 25-50, approximate weight 1290g.
- 29×2.6″, psi 20-40, approximate weight 1315g.
$21.00
Add to cart
Product attributes
- The wrench is used for tightening and unscrewing screws with hex-shaped nuts.
- The plastic-injected handle offers a comfortable and compact grip, which enables efficient working while the high-quality material enables long-term use of the tool.
- 2, 2.5 and 3mm hex bits
$649.00
Select options
The Stage Ghost Base Layer Collection delivers the highest level of mobility found in a comprehensive underlayer protection system by incorporating materials from D3O®. The D3O® Ghost™ protection is a breathable mesh fabric that lays perfectly when worn. Achieving new levels of ergonomic fit and flexibility, this engineered collection blends so seamlessly with the natural movement of the human body, that it almost feels supernatura
$209.00
Read more
RAW™ is the high-end hydration pack for Enduro/Off-road motorcycle racing and adventure, with the perfect balanced fit for any individual rider.
The pack is equipped with our bounce free No Dancing Monkey™ 1.2 harness system that makes the pack stay put on your back even in the most gnarly terrain. The unique elastic harness system allows you a tight fit but gives that extra freedom to breathe and move.
The RAW™ 3 is geared up with a main storage compartment for hydration and a water-resistant phone pocket. A bonus is the smart detachable organizer pocket for tools, equipment and food.
$299.00
Add to cart
For the first time, we created an air spring with a truly better spring rate, everywhere in the travel, than a coil. The Secus upgrade delivers the first and only air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.