Showing 265–288 of 654 results
$40.00
Add to cart
Engineered with “Kashima-phillic” tackifiers to increase the bonding of oil to stanchion, mineral oil and molybdenum additives make the ultra-slippery Gold formula oil an important component to the Fox recipe for plushness.
- Use 20wt. Gold Bath Oil with FIT and O/C damper cartridges but should NEVER be used in open bath fork dampers. (For Open Bath Dampers – Use Fox Red 10wt Fluid)
- Gold is compatible with all 34mm, 36mm, and 40mm FOX Low-Friction wipers
- FOX 20wt Gold is only compatible with the latest version of the 32mm FOX Low-Friction wipers 803-00-878 or the new flangeless 803-00-944.The label indicates specifically that these wipers are compatible with 20wt. Gold.
$45.00
Add to cart
The Fox suspension fluid Gold 5WT protects the fork effectively against wearing. It maintains seals, reduces frothing and provides optimal damping characteristics over a wide temperature range.
$55.00
Add to cart
Perfect for protecting your fork against wear, the Fox Suspension R3 5WT ISO 15 Suspension Fluid reduces frothing, maintains seals, and provides excellent damping over a wide temperature range.
$39.00
Add to cart
Keep The Mud Off Your Fork And Out Of Your Eyes With The Official FOX Mud Guard Designed Specifically For FOX 36, 38
- Genuine Fox Mud Guard for 2021
- Install in minutes!
- Available in Black to suit 2021 Fox 36 or 38 only.
- Part: 803-01-441
$49.00
Add to cart
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 32mm with NO flange. Part number 803-00-944
Suitable for all Fox 32 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 2 crush washers
$69.00
Add to cart
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 34mm with NO flange. Part number 803-00-945
Suitable for all Fox 34 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 3 crush washers
$399.00
Most Advanced Lightweight Trail Shock An entirely new base valve design and the addition of a valved circuit in open mode raises the already high bar for trail category performance. Factory Says It All The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, and ultra durable Genuine Kashima Coat. These products have been proven on the Downhill World Cup Circuit. Key Highlights Are • NEW graphics • X2 small bump sensitivity meets DPS lightweight and simplicity • Recirculating oil damper design for more control • Remote option • One-piece EVOL air sleeve improves responsiveness and sensitivity • Three-position lever with adjustable Open Mode • Offers 10 clicks to fine-tune compression • Imperial and metric sizes • Factory Series models feature Genuine Kashima Coat • Starting Weight 398g (includes Igus bushings, but no mounting hardware)
210 X 52.5
Add to cart
$79.00 – $99.00
Select options
It is important to have the right tool for the job. It not only will make the job easier, but it will keep you from damaging costly parts. The Fox Shox Seal Driver Tool is designed to perfectly drive Fox fork wiper seals with ease. These drivers will work on both flanged seals and the new low friction seals without flanges.
$179.00
Select options
Performance-focused open-face trail helmet
The Speedframe Pro Helmet has earned Virginia Tech’s best rating (5 STARS) in its Bicycle Helmet Ratings program. Designed with input from our pro mountain bike athletes, this top-tier open-face mountain bike helmet offers a market-leading feature set including MIPS™, an easily adjustable multi-position visor, and a 360-degree fit system. The pro version is equipped with a Varizorb™ dual-density EPS liner, Fidlock® SNAP helmet buckle, and an XT2® antimicrobial comfort liner.
$4,999.00
Read more
Speed Without Sacrifice
Inspired by the medieval Scottish two-handed great sword, known for its strength and symbolism of the rugged Highlands, Deviate’s award-winning Claymore embodies this legacy – crafted to conquer the world’s most challenging terrains. Now available in a new range of colours inspired by Scotland’s heritage, this long-travel enduro bike is as striking as it is capable.
Whether you’re descending root-strewn drops or racing between tapes at dizzying speeds, the Claymore excels. Designed to be the ultimate long-travel enduro bike, it offers unparalleled handling, combining speed, precision, and versatility for both racing and trail riding. The Claymore’s goal is to dominate enduro stages with winning pedal performance and playful agility for off-tape adventures.
We remain committed to delivering unmatched reliability, reinforcing our dedication with a Lifetime Bearing Replacement Programme to complement our Lifetime Frame Warranty and Crash Replacement Programme.
Frame Size: L
Wheel size: 29″ or MX
Rear travel: 165mm
$5,490.00
Add to cart
HD6
The HD6 is the evolution of one of the most successful enduro bikes in history. Designed with input from our Enduro World Cup team and building upon our award-winning Ripmo and HD lines, the HD6 features increased travel, a completely redesigned suspension layout, and mixed wheels.
$2,429.46
Add to cart
THE ROAD GOES ON FOREVER AND THE PARTY NEVER ENDS
The Quincy is the definition of an all-road ready bike, aka “gravel”. Gobs of tire clearance (with choice of 45mm 700c or 2.1” 650b tires), threaded BB, hidden fender mounts, three bottle cage mounts. Our mountain bike background and experience with MTB standards, geometry and materials results in the kind of drop-bar singletrack and gravel rallycat we can all get onboard with.
Frame Size : 54CM
Wheel Size: 700C
SAME BIKE AS SANTA CRUZ STIGMATA
$10,499.00
Add to cart
GRAVITY DEFIED. CARBON PERFECTED
This Crafty combines the massive 100Nm torque of the Bosch CX Gen5 Race motor with a sleek Stealth Carbon frame. Between the removable 800Wh battery and the pro-tier Fox Factory Kashima suspension, this bike is engineered for maximum thrill and seamless tech integration. Frame Size: L Wheel size: 29″ Rear travel: 150mm Drive Unit: Bosch Performance CX Race Battery size: 800 Wh
$169.00
Add to cart
DT Swiss Shimano Micro Spline Steel 3 Pawl Freehub Body.
Fits 3-Pawl system hubs as found on DT complete wheels and 370 hubs, for freehubs to fit 240, 350 or higher end complete wheels please see the ratchet freehub range
$199.00
Add to cart
Microspline Freehub bodies for DT Swiss will enable you to convert your DT Swiss hubs from Shimano HG and SRAM XD to Shimano Microspline
- Fits DT 180, 240, 350 & 440 Hubs
- 12×142/148 End Cap
- Replacement freehub body
- Ratchet EXP and ratchet freehub bodies are NOT interchangeable
$199.95
Add to cart
Change the cassette freehub body interface for your Hope Pro 5 rear hubs.
These Are Complete Freehub Body Replacement Kits That Include Bearings, Springs, Pawls, And End Cap. This freehub body only suits the Hope Pro 5 Rear Hub which has 108 points of engagement. Not compatible with the Hope Pro 5 E-Bike Rear Hub. Not backwards compatible with Pro 4 or Pro 2 Hubs. Kit Includes: - Hope Pro 5 freehub body shell - All Freehub body bearings - Dust Seal and Seal Cover - Pawls and Springs
$149.00
Select options
The Pro 4 is an incredibly versatile and easily serviceable hub that builds upon Hope's reputation for bulletproof quality and attention to detail. The hubs are machined from a single billet of 2014 T6 aluminium and run on stainless steel sealed cartridge bearings for smooth running and outstanding reliability.
Specs:
- 15x110mm axle.
- Sealed stainless steel cartridge bearings.
- Hub shell machined from forged aluminium billet.
- Standard 6 bolt disc fitting.
- Unsurpassed reliability.
- Larger diameter flanges, with no increase in weight.
$959.00
Add to cart
HARSHNESS HAS NO HOME HERE.
MORE HUCK. LESS PRAY.
• 29”
• Carbon
• Lifetime warranty
$259.00
Select options
Super Ventilated Full Face Head and Brain Protection
Renowned for its ventilation and comfort, this all-purpose MTB helmet is fitted with 360 Turbine technology, offering great protection at a fair price.
This fully ASTM DH certified helmet is the go-to helmet for enduro and bikepark riders. Uphill, downhill, upside down, E-bike or trail - you name it, the MTB4.0 has you covered. The full-face design with removable mouth piece offers outstanding ventilation and its convenient Fidlock® buckle makes life just peachy!
We all crash. Sometimes hard, and sometimes even harder! There is a solution to minimize the risk of a head and brain injury, however – go and get the best helmet you can find that reduces both rotation and impact energy to your head and brain!
Our helmets feature 360 ̊ Turbine Technology, the helmet is lined with turbines which are
360 ̊moving discs constructed from an energy-absorbing shape and material, this tech has two exclusive advantages, namely the reduction of rotational acceleration to the head and brain and the absorption of energy upon impact at concussion level.
So, the next time you crash, see to it that you are protected by the best!
$49.00
Features and advantages of the new compounds GALFER BIKE:
Select options
- Organic semi-metal compound (non asbestos)
- Absence of noise.
- Better feeling, progressiveness and braking power.
- Minimization of vibration to the wheel.
- Less wear on the brake discs.
- Resistance to high temperatures.
- Increased durability.
$379.00
Select options
The lightweight Giro Coalition™ Spherical combines Spherical Technology™ powered by Mips® and Progressive Layering featuring both EPP and EPS foam, with best-in-class ventilation and the added protection of our innovative Halo System chinbar.
- HALO SYSTEM CHINBAR
- SPHERICAL TECHNOLOGY
- IONIC+® PADDING
- DIRECTIONAL SNAP SYSTEM
$59.00 – $75.00
Select options
ULTRA LIGHTWEIGHT WITH SUPERIOR GRIP
Your hands will thank you later…
Troy Lee Designs gloves are all researched, designed and meticulously tested before they make their way on to the hands of great athletes around the world.
The Ace Glove is a lightweight slip-on design that utilizes a single-layer palm with laser hole perforation. Silicon printing on the fingertips is used for lever grip.
$54.95
Select options
Get a grip mate…
Troy Lee Designs gloves are all researched, designed and meticulously tested before they make their way on to the hands of great athletes around the world.
The Flowline Glove features an adjustable velcro cuff and a single layer palm with laser perforated holes for breathability. Micro-mesh is used all over for added ventilation. Index and thumb are touch screen compatible.
- Adjustable velcro closure
- Single-layer palm with mapped laser hole perforation
- Conductive index and thumb touch screen compatibility
- Sublimated top hand for graphics