Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
WHAT IS CUSHCORE?
CushCore is an engineered foam insert that mounts inside a mountain bike tire. It divides the inner volume of the tire in half, with air underneath the tread and the CushCore insert next to the rim.
Cushcore absorbs impacts, reduces vibration, and adds lateral stability to the tire. These characteristics translate to a more controlled, comfortable, and faster ride.
This system is designed to be used with tubeless-ready or tubeless converted mountain bike rims and tires. CushCore is compatible with tubeless tire sealants.
A specially designed tubeless air valve is included with each insert. The air valve allows air to move through the valve without becoming obstructed by the insert.
Enduro has evolved ever closer to Downhill. The Enduro MK3 Stem is all you need for hitting the trails with wing suit type accuracy. This Stem was born out of rider’s demands for precision and for those moments when you have to be inch-perfect.
- Forged and Fully CNC machined from AL6061 – T6 Aluminium
- Stainless Steel Hardware
- Available lengths – 35mm, 42.5mm and 50mm
- Available in both 31.8mm and 35mm Clamp
- Weight; 35mm 138g, 42.5mm 152g , 50mm 160g
- 9 Colours; Burgtec Black, Race Red, Deep Blue, Purple Rain, Kash Bronze, Iron Bro Orange, Rhodium Silver, Burgtec Bullion Gold and Toxic Barbie Pink
KWT Polyfilm rim tape is an excellent tape that is comparable to those of larger brands at a fraction of the cost!
ABSOLUTE LIGHTEST IN XC. MADE FOR MARATHON.
At under 1300g, the 32 Step-Cast is the lightest MTB fork and made for marathon racing. With a sleek reverse arch, this fork also gains 40% stiffness over its predecessor. Available in 100mm travel only.
| Part Number | 910-21-333 |
| Rake | 44mm |
| Chassis | Step-Cast |
| Wheelsize | 29in |
| Series | Factory |
| Travel | 100mm |
| Damper | Grip SL |
| Damper Controls | Psh-Lk |
| Axle | Kabolt SL 110 |
| Steerer | 1.5 T |
Bigger, grippier, lighter and as tough as ever. The Penthouse Flat MK5 pedal is here!
After two years of development and testing the MK5 Penthouse Flat is here. Retaining our signature toughness, the MK5 is the lightest and grippiest Burgtec pedal to date. We did this by not only increasing the size of the pedal platform, but also how concave it is alongside reducing the diameter of the pins and adding the most wear resistant internals on the market. From the outside to the inside, we’ve sweated the details of the MK5 to bring you the ultimate flat pedal.
SRAM CODE R BRAKESET
- Brand new brakeset, just not in retail packaging
- Comes with clamps, olives and barbs.
- Front and Rear set
Grippler Grips are made with Race Face’s own special blend of rubber that’s tough as nails and soft to the touch. A directional ramped grip profile under the fingers helps to eliminate slippage no matter how sloppy the conditions.
$45.00
Add to cart 
Material: aluminum
Compatibility: Yeti SB100, SB130, SB150, SB4.5, SB5.5, SB6, SB5+
Saddle Up
Based on the latest FOX Transfer platform with its proven performance, the new Turbine R Dropper Post features a slick seat clamp design for reduced stack height, 25g weight savings from the previous version, and is available with up to 200mm of drop. This post will treat you right.
FEATURES
- Backwards compatible, works with both 10-50t and new 10-52t cassettes.
- Updated cage architecture provides better chain retention and precise shifts.
- Comes in GX Eagle™ master colorway as part of Eagle™ Colorsystem and goes with all colors of Eagle cassettes & chains – from Black to Gold to Rainbow, to HardChrome and new Copper.
Description
For the first time ever, our legendary Code brake now wears the Ultimate crown. The full-powered stopper features a new technology to improve your cockpit aesthetic: Stealth. The all-new lever body design brings the hose closer to the bar, allowing for a sleeker, more modern ride. The proven internals remain the same, with SwingLink driving our signature feel. And for unrivaled ease of customization, Code Ultimate features tool-free Reach and Contact Point Adjust. To top it all off, a carbon blade joins our Lever Pivot Bearing technologies, so feel will remain smooth. Our best just got better.
FEATURES
– Aluminium trigger designed for a positive lever feel.
– Includes bar clamp
– MatchMaker™X compatible.
– Master GX Eagle™ master colorway to match all cassette and chain colors as part of Eagle™ Colorsystem.