Recently added item(s)
Cart Subtotal
$999.00
Product Description
$29.00
Set of six oversized pins.
All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.
Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.
In stock
Description
Follow the instructions below referencing this exploded view
– With the post still installed on bike complete the following steps
– Remove the saddle and clamps
– Wipe away any dirt or debris
– Lower the post to mid travel
– Unthread mid cap assembly (8)
– Remove Cartridge lockring (6) with needle nose pliers
– Upper tube (7) will now slide out
– Replace guide pins (10) with oversized guide pins (19) or (20) and regrease
– Reassemble in reverse order
Related Products
When you need to go really big, reach for the 38.
Building on a legacy of Enduro dominance, the Limited Edition 38 Racing Green pays homage to a century of auto racing. Optimized for 170mm of travel and featuring Grip X2 damping, this fork redefines what a long-travel single crown can do, setting a new benchmark for confidence, capability, and durability. • Wheel size: 29” • Travel: 170mm • Damper: GripX2
The new Fox Inverted Fork
Podium is designed to be ridden like a downhill fork. No barriers. No hesitation. Complete confidence that your front wheel will hold the line, no matter how fast or how big you push it. All this while keeping your bike in a familiar range of travel and geometry in a single crown package.
• Wheel size: 29”
• Travel: 170mm
• Damper: GripX2
• Crown: 58HT
Most Advanced Lightweight Trail Shock An entirely new base valve design and the addition of a valved circuit in open mode raises the already high bar for trail category performance. Factory Says It All The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, and ultra durable Genuine Kashima Coat. These products have been proven on the Downhill World Cup Circuit. Key Highlights Are • NEW graphics • X2 small bump sensitivity meets DPS lightweight and simplicity • Recirculating oil damper design for more control • Remote option • One-piece EVOL air sleeve improves responsiveness and sensitivity • Three-position lever with adjustable Open Mode • Offers 10 clicks to fine-tune compression • Imperial and metric sizes • Factory Series models feature Genuine Kashima Coat • Starting Weight 398g (includes Igus bushings, but no mounting hardware)
210 X 52.5
$399.00
Add to cart
high-quality CNC machined dropper lever for any cable actuated dropper post that matches the aesthetics of Hope’s Brakes. The lever rotates on ball bearings for super smooth and precise action with minimal unwanted movement and features adjustable leverage with a 20% range of adjustment.
- CNC machined
- Smooth ball bearing actuation
- Adjustable leverage
- Adjustable reach
- Works with the majority of dropper posts
- Mounts directly to Hope master cylinders via a direct shifter mount for super clean look
- Mounts with any SRAM Matchmaker or bar clamp
Composure in the chaos. When the track gets wild at race speed, the 38 doesn’t flinch. Optimized for 160 to 180mm of travel with Genuine Kashima Coat, plus the Glidecore air spring reducing friction and bind substantially, the 38 sets the benchmark for single crown confidence, performance and durability.
Wheel size: 29”
Travel: 170mm
Damper: Grip X2
$2,190.00
All standard steel springs are black and are marked with their spring rate in lbs/in (in 50 lbs increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself.
$79.00
Replace the thru-axle on your front fork with this genuine Fox Shox replacement part. The Fox Racing Shox 15x100mm QR Thru Axle is compatible with all 32mm and 34mm Fox 15mm QR Forks.
It is important to have the right tool for the job. It not only will make the job easier, but it will keep you from damaging costly parts. The Fox Shox Seal Driver Tool is designed to perfectly drive Fox fork wiper seals with ease. These drivers will work on both flanged seals and the new low friction seals without flanges.
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 32mm with NO flange. Part number 803-00-944
Suitable for all Fox 32 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
$49.00
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 2 crush washers
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimised by using a smaller wire diameter and fewer coils, creating a lighter spring.
All SLS springs are orange and are marked with their spring rate in lbs/in and the maximum travel of the shock that they are designed to be paired with.
$209.00 – $229.00
When you need to go really big, reach for the 38.
Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability. Welcome to the big time. • Wheel size: 29” • Travel: 170mm • Damper: GripX2
The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. Includes cable and housing. It's the easiest way to upgrade any mechanical dropper.
$109.00
- 1x Remote body
- 1x Black thumb cushion (colours sold seperately)
- Cable, housing, cable end & barrel end
Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit.
Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders.
210mm Dropper Post – adjustable down to 190mm
180mm Dropper Post – adjustable down to 160mm
150mm Dropper Post – adjustable down to 130mm
120mm Dropper Post – adjustable down to 100mm
Compatible with OneUp Components Dropper posts only.
$22.00
Add to cart
WELCOME TO THE CORONATION. THE UNDISPUTED ALL-MOUNTAIN CHAMPION GETS A NEW CROWN.
For MY23 the FOX 36 receives an update in the form of a new crown with updated design and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams.- Spring: EVOL air spring.
- Dampers: GRIP 2, external HSC / LSC and HSR / LSR.
- Lowers: 15mm x 110mm QR
- Wheel size: 29″
- Offset: 44mm
- Travel: 160mm
- Colour: Shiny Orange
