Recently added item(s)
-
IN STOCK
Dropper Post Lever OneUpComponents v3
1 x $109.00
Cart Subtotal
$109.00
Product Description
$29.00
Set of six oversized pins.
All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.
Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.
In stock
Description
Follow the instructions below referencing this exploded view
– With the post still installed on bike complete the following steps
– Remove the saddle and clamps
– Wipe away any dirt or debris
– Lower the post to mid travel
– Unthread mid cap assembly (8)
– Remove Cartridge lockring (6) with needle nose pliers
– Upper tube (7) will now slide out
– Replace guide pins (10) with oversized guide pins (19) or (20) and regrease
– Reassemble in reverse order
Related Products
When you need to go really big, reach for the 38.
Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability. Welcome to the big time. • Wheel size: 29” • Travel: 170mm • Damper: GripX2
THE ULTIMATE ALL-MOUNTAIN WEAPON
Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders.Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. GRIP X exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency. • Wheel size: 29” • Travel: 160mm • Damper: GripX
Short Travel. Hard Hitting. All Trail.
The lightest 36 ever, the sub-1800g 36 SL injects plushness and steering responsiveness into a true Trail fork. An evolution of the 36 chassis in 120 to 140mm of travel, the 36 SL gives modern Trail riders the confidence to go big without the weight.
• 29”
•140mm
• Grip x damper
Keep The Mud Off Your Fork And Out Of Your Eyes With The Official FOX Mud Guard Designed Specifically For FOX 36, 38
$39.00
- Genuine Fox Mud Guard for 2021
- Install in minutes!
- Available in Black to suit 2021 Fox 36 or 38 only.
- Part: 803-01-441
Fox’s 1x dropper remote lever offers improved ergonomics for easier operation on the trail, and it only weighs 33.5 grams, which is 34% lighter than the old version! This remote is compatible with the Fox Transfer dropper posts, both internal and external models, as well as many other cable actuated dropper seat posts.
- New and updated 2021 Fox Transfer Remote Lever designed specifically to work with the Fox Transfer Seatpost.
- This lever is suitable for left mount, underneath the bar.
- Genuine Fox lever.
- Includes cable and housing
- Part Number: 925-06-004
- Fox Transfer setup HERE
WELCOME TO THE CORONATION. THE UNDISPUTED ALL-MOUNTAIN CHAMPION GETS A NEW CROWN.
For MY23 the FOX 36 receives an update in the form of a new crown with updated design and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams.- Spring: EVOL air spring.
- Dampers: GRIP 2, external HSC / LSC and HSR / LSR.
- Lowers: 15mm x 110mm QR
- Wheel size: 29″
- Offset: 44mm
- Travel: 160mm
- Colour: Shiny Orange
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 32mm with NO flange. Part number 803-00-944
Suitable for all Fox 32 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
$49.00
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 2 crush washers
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimised by using a smaller wire diameter and fewer coils, creating a lighter spring.
All SLS springs are orange and are marked with their spring rate in lbs/in and the maximum travel of the shock that they are designed to be paired with.
$209.00 – $229.00
Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. By decreasing the volume in the air canister, the shock will ramp up more quickly at the end of its travel, resisting harsh bottom-outs while still providing small-bump compliance in the top of its travel. It is critical to follow Fox’s instructions and recommendations of which spacers to use.
$49.00
Replace the thru-axle on your front fork with this genuine Fox Shox replacement part. The Fox Racing Shox 15x100mm QR Thru Axle is compatible with all 32mm and 34mm Fox 15mm QR Forks.
KEEP YOUR RIDE SMOOTH AND RELIABLE WITH THE ONEUP V2 DROPPER REBUILD KIT
Kit Includes:- 1 x SKF Midcap Assembly
- 1 x Midcap O-Ring
- 2 x Lower Bushings
- 1 x Upper Bushing
- 1 x Cartridge Spacer
- 2 x Polymer Guide Pins
- 3 x Brass Guide Pins
SHIMANO – Seat post Dropper Lever – I-SPEC EV
With ideal ergonomics and smooth lever action, SHIMANO’s SL-MT800-IL seat post dropper lever provides quick lever access with minimal hand movement. The new I-SPEC EV lever offers a wide range of adjustments and 7mm of cable stroke. With a lightweight and compact design, the SL-MT800-IL lever sets the standard for mountain bike dropper remotes.
- Fast & effortless operation
- Quick lever access from grip position with minimum hand movement
- Light operation effort
- Compatible with common dropper posts
- 7 mm cable stroke
- I-SPEC EV type only
Composure in the chaos. When the track gets wild at race speed, the 38 doesn’t flinch. Optimized for 160 to 180mm of travel with Genuine Kashima Coat, plus the Glidecore air spring reducing friction and bind substantially, the 38 sets the benchmark for single crown confidence, performance and durability.
Wheel size: 29”
Travel: 170mm
Damper: Grip X2
$2,190.00
It is important to have the right tool for the job. It not only will make the job easier, but it will keep you from damaging costly parts. The Fox Shox Seal Driver Tool is designed to perfectly drive Fox fork wiper seals with ease. These drivers will work on both flanged seals and the new low friction seals without flanges.