Recently added item(s)
Cart Subtotal
$299.00
Product Description
$79.00 – $99.00
It is important to have the right tool for the job. It not only will make the job easier, but it will keep you from damaging costly parts. The Fox Shox Seal Driver Tool is designed to perfectly drive Fox fork wiper seals with ease. These drivers will work on both flanged seals and the new low friction seals without flanges.
Additional information
| Size | 32mm, 34mm, 36mm, 38mm |
|---|---|
| Brand | Fox |
Related Products
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 32mm with NO flange. Part number 803-00-944
Suitable for all Fox 32 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
$49.00
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 2 crush washers
KEEP YOUR RIDE SMOOTH AND RELIABLE WITH THE ONEUP V2 DROPPER REBUILD KIT
Kit Includes:- 1 x SKF Midcap Assembly
- 1 x Midcap O-Ring
- 2 x Lower Bushings
- 1 x Upper Bushing
- 1 x Cartridge Spacer
- 2 x Polymer Guide Pins
- 3 x Brass Guide Pins
ULTRA LIGHTWEIGHT XC WEAPON
32 Step-Cast’s pioneering lower leg shape isn’t just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. • Wheel size: 29” • Travel: 100mm • Damper: FIT4
Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. By decreasing the volume in the air canister, the shock will ramp up more quickly at the end of its travel, resisting harsh bottom-outs while still providing small-bump compliance in the top of its travel. It is critical to follow Fox’s instructions and recommendations of which spacers to use.
$49.00
Replace the thru-axle on your front fork with this genuine Fox Shox replacement part. The Fox Racing Shox 15x100mm QR Thru Axle is compatible with all 32mm and 34mm Fox 15mm QR Forks.
Riding SID Ultimate means every detail is considered. Packed in a stiff, lightweight 35mm chassis, and equipped with the lightest performance damper we’ve ever made – Charger™ Race Day. Perfectly balanced to satiate your need for XC speed.
- 120mm
- 29”
Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit.
Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders.
210mm Dropper Post – adjustable down to 190mm
180mm Dropper Post – adjustable down to 160mm
150mm Dropper Post – adjustable down to 130mm
120mm Dropper Post – adjustable down to 100mm
Compatible with OneUp Components Dropper posts only.
$22.00
Add to cart
Set of six oversized pins.
All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.
Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.
$29.00
For the first time, we created an air spring with a truly better spring rate, everywhere in the travel, than a coil. The Secus upgrade delivers the first and only air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.
$299.00
The Super Deluxe Ultimate is the shock of choice for the podium.
This is the most advanced shock Rockshox has ever made, packed to the hilt with more options for fine-tuning adjustments that meaningfully improve suspension performance. • 205 × 65mm • RC2T damper • Threshold lever for added peddling efficiency.
Keep Your Ride Smooth And Reliable With The OneUp V2 Dropper Rebuild Kit
The V2.1 Dropper Rebuild Kit is an updated rebuild kit for the OneUp V2 Dropper Post with an updated midcap assembly and new ultra-low friction SKF® seals. This Kit does 30.9,31.6 and 34.9mm diameters Includes:- 1 x SKF® Midcap Assembly
- 1 x Upper Bushing
- 1 x Lower Bushing
- 3 x Brass Pins
WELCOME TO THE CORONATION. THE UNDISPUTED ALL-MOUNTAIN CHAMPION GETS A NEW CROWN.
For MY23 the FOX 36 receives an update in the form of a new crown with updated design and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams.- Spring: EVOL air spring.
- Dampers: GRIP 2, external HSC / LSC and HSR / LSR.
- Lowers: 15mm x 110mm QR
- Wheel size: 29″
- Offset: 44mm
- Travel: 160mm
- Colour: Shiny Orange
SID SL ULTIMATE FOR CROSSCOUNTRY
When you ride the SID SL Ultimate, you realize that RockShox considered every detail. A stable chassis and the lightest Charger Race Day shock are a perfect pairing. Perfectly tuned for the pace needs of cross-country.
The DebonAir air spring is specifically tuned for XC needs, letting the fork maintain a higher ride height for increased confidence and control on the trail. Extremely low-friction SKF seals provide long fork performance and great responsiveness, and Maxima-Plush damping fluid reduces friction and noise.
• Wheel size: 29”
• Travel: 120mm
• Damper: Charger Race Day
THE MASTER OF ALL-MOUNTAIN
From aggressive trail to enduro, the advanced damping, fade free performance and class-leading durability of FLOAT X makes it the versatile and lightweight choice for All-Mountain riders earning their descents. • 230 × 60mm • Tool free compression and rebound adjustment • EVOL Air sleeve
High-quality CNC machined dropper lever for any cable actuated dropper post that matches the aesthetics of Hope’s Brakes. The lever rotates on ball bearings for super smooth and precise action with minimal unwanted movement and features adjustable leverage with a 20% range of adjustment.
- CNC machined
- Smooth ball bearing actuation
- Adjustable leverage
- Adjustable reach
- Works with the majority of dropper posts
- Mounts directly to Hope master cylinders via a direct shifter mount for super clean look
- Mounts with any SRAM Matchmaker or bar clamp