Rear Shock FOX Volume Spacer Tuning Kit FLOAT CTD/DPS 9MM

For the first time, we created an air spring with a truly better spring rate, everywhere in the travel, than a coil. The Secus upgrade delivers the first and only air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.

The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. Includes cable and housing. It's the easiest way to upgrade any mechanical dropper.

• 1x Remote body
• 1x Black thumb cushion (colours sold seperately)
• Cable, housing, cable end & barrel end

Note: Bar Clamps and Adapters are sold separately.

SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. All SLS springs are orange and are marked with their spring rate in lbs/in and the maximum travel of the shock that they are designed to be paired with. 

The new Fox Inverted Fork

Podium is designed to be ridden like a downhill fork. No barriers. No hesitation. Complete confidence that your front wheel will hold the line, no matter how fast or how big you push it. All this while keeping your bike in a familiar range of travel and geometry in a single crown package.

• Wheel size: 29”

• Travel: 170mm

• Damper: GripX2

• Crown: 58HT

Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction,  34mm with NO flange. Part number 803-00-945 Suitable for all Fox 34 models. Past and Present Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox. Kit includes:

• 2 Dust wiper / oil seals
• 2 Foam lubricating rings
• 3 crush washers

Keep The Mud Off Your Fork And Out Of Your Eyes With The Official FOX Mud Guard Designed Specifically For FOX 36, 38

• Genuine Fox Mud Guard for 2021
• Install in minutes!
• Available in Black to suit 2021 Fox 36 or 38 only. 
• Part: 803-01-441

 It is important to have the right tool for the job. It not only will make the job easier, but it will keep you from damaging costly parts. The Fox Shox Seal Driver Tool is designed to perfectly drive Fox fork wiper seals with ease. These drivers will work on both flanged seals and the new low friction seals without flanges.

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit. Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders. 210mm Dropper Post – adjustable down to 190mm 180mm Dropper Post – adjustable down to 160mm 150mm Dropper Post – adjustable down to 130mm 120mm Dropper Post – adjustable down to 100mm   Compatible with OneUp Components Dropper posts only.