Recently added item(s)
Cart Subtotal
$49.00
Product Description
$99.00
Designed in conjunction with Aussie DH racer Troy Brosnan, the Dissector seeks to minimize drag while retaining cornering control. This versatile tire can be used as a front, a pair, or as a rear depending on trail conditions.
- 29″ x 2.4
- 3C MaxxTerra
- EXO+
In stock
Be the first to review “Tyre Maxxis Dissector 2 29×2.4 EXO+ 3CT”
You must be logged in to post a review.
Related Products
Power of locked-in flats.
Turbine is the most concave flat pedal designed for climbing, mobbing descents and tackling the most demanding terrain where riders are all-in on grip. Covered by our Lifetime Warranty inclusive of crashes and available in seven colors. The most locked-in feel you can get on traditional flat pedals,for when good grip just isn’t good enough.
• Chromoly steel Axle
• 6061 aluminum body, steel pins
• Lifetime warranty
The PC-X1 chain comes from a long line of dependable, lightweight chains that are built for toughness. Designed with SRAM’s trusted XX1 geometry, the PC-X1 features solid pin construction, 11-speed PowerLock® and smooth, efficient shifting that you can count on every time out.
• 11 speed •118 links •259g •powerlock connector
This is the most advanced carbon fiber handlebar on the market and a rider favourite for all disciplines from trail to DH. Get industry-leading compliance and strength with the OneUp V2 Carbon Handlebar, so you can ride harder for longer.
• Clamp: 35mm
• Rise: 50mm
• Width: 800mm
$246.00
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish
Grippler Grips are made with Race Face’s own special blend of rubber that’s tough as nails and soft to the touch. A directional ramped grip profile under the fingers helps to eliminate slippage no matter how sloppy the conditions.
$45.00
Of all the components that make up a mountain bike drivetrain, the shifter doesn’t exactly get a lot of spotlight time. But as the rider’s literal command and control centre, the GX Eagle™ shifter is more than worthy of recognition. With intuitive thumb actuated triggers, the positive feel gives the right rider input to make shifts crisp and discernible every time. What’s more, its already legendary reliability continues for all-day epics, and all-time experiences.
• Aluminium trigger designed for a positive lever feel.
• Includes bar clamp
• MatchMaker™X compatible.
KWT Polyfilm rim tape is an excellent tape that is comparable to those of larger brands at a fraction of the cost!
The revered Silverado saddle has been updated with a shorter 265mm length and new Fusion Form base technology to provide the same comfort you know and love, but with a modern look!
The Silverado optimizes efficiency in a forward-leaning pedaling position with a fiber percentage similar to the recently released Gravelier saddle. Fusion Form also allows the padding to be recessed into the base, which provides a sleek aesthetic without actually reducing overall padding thickness.
$125.00
- ChromAlloy rails
- 142 mm wide
- 270 grams
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish
$119.00
LIGHT DUTY TRAIL TIRE THAT ROLLS FAST IN DRY CONDITIONS
The aggressive tread combined with a high volume casing make the Ardent a great front and rear combo on a trail bike, or as a rear tyre on an enduro bike. If using on an enduro bike, match it up with either a Maxxis Minion DHF, DHR or Highroller 2. The ramped centre knobs offer great rolling speed while their shape allows them to be very effective at braking and climbing. The Ardent also offers oversized and stepped side knobs for multiple gripping edges when cornering.- Tubless Ready
- Size: 27.5 x 2.25
- Great all-rounder, a real “Jack of all trades”
- Works great as a front or rear on a trail bike
XTR SM-CRM95 race performance chainring delivers smooth and responsive peddling over bumpy terrain. The SM-CRM95 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention.
• Options: 32 and 34t
• Weight: 34 tooth is approximately 84 grams
The Super Deluxe Ultimate is the shock of choice for the podium.
This is the most advanced shock Rockshox has ever made, packed to the hilt with more options for fine-tuning adjustments that meaningfully improve suspension performance. • 205 × 65mm • RC2T damper • Threshold lever for added peddling efficiency.
SID SL Ultimate for CrossCountry
Cross-country purists… we see you. You’re why SID SL Ultimate is the lightest XC fork on the trail. But weight is meaningless without world-class performance and durability. SID SL features a new Charger Race Day 2 Damper with three-position (3P) compression damping—rigid Lock, plush Open, and efficient Pedal positions, on demand for every inch of the race course.
• Wheel size: 29”
• Travel: 120mm
• Damper: Charger Race Day
Microspline Freehub bodies for DT Swiss will enable you to convert your DT Swiss hubs from Shimano HG and SRAM XD to Shimano Microspline
- Fits DT 180, 240, 350 & 440 Hubs
- 12×142/148 End Cap
- Replacement freehub body
- Ratchet EXP and ratchet freehub bodies are NOT interchangeable
Reviews
There are no reviews yet.