Recently added item(s)
Cart Subtotal
$1,599.00
Product Description
$22.00
Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit.
Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders.
210mm Dropper Post – adjustable down to 190mm
180mm Dropper Post – adjustable down to 160mm
150mm Dropper Post – adjustable down to 130mm
120mm Dropper Post – adjustable down to 100mm
Compatible with OneUp Components Dropper posts only.
Only 2 left in stock
Email to a friendDescription
SHIM INSTRUCTIONS:
1. Unscrew the post collar by hand and slide it up towards the seatpost head. Then gently press the remote lever to pop the upper bushing (White part) out of the lower post. Then slide this bushing up towards the seatpost head.
2. Drop your saddle to a mid stroke position at least 75mm below full extension. Install all 3 10mm pin shims by sliding them into the lower tube grooves below the upper bushing.
3. Lower the upper bushing and ensure you can push it fully into the lower tube by hand (if you can’t you may need to drop the seat a bit more). Reinstall the seat collar by hand. Extend the post fully. Your post is now 10mm shorter.
Repeat this process to add another 3 pin shims stacked on top of the first 3 to shorten the post by 20mm.
4. Raise your entire post to a comfortable ride/climbing height and pedal around in your riding shoes/kit to make sure it is correct.
Congratulations, you now have the longest dropper post that will fit on your bike!
Go Ride.
Related Products
High-quality CNC machined dropper lever for any cable actuated dropper post that matches the aesthetics of Hope’s Brakes. The lever rotates on ball bearings for super smooth and precise action with minimal unwanted movement and features adjustable leverage with a 20% range of adjustment.
- CNC machined
- Smooth ball bearing actuation
- Adjustable leverage
- Adjustable reach
- Works with the majority of dropper posts
- Mounts directly to Hope master cylinders via a direct shifter mount for super clean look
- Mounts with any SRAM Matchmaker or bar clamp
Replace the thru-axle on your front fork with this genuine Fox Shox replacement part. The Fox Racing Shox 15x100mm QR Thru Axle is compatible with all 32mm and 34mm Fox 15mm QR Forks.
WELCOME TO THE CORONATION. THE UNDISPUTED ALL-MOUNTAIN CHAMPION GETS A NEW CROWN.
For MY23 the FOX 36 receives an update in the form of a new crown with updated design and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams.- Spring: EVOL air spring.
- Dampers: GRIP 2, external HSC / LSC and HSR / LSR.
- Lowers: 15mm x 110mm QR
- Wheel size: 29″
- Offset: 44mm
- Travel: 160mm
- Colour: Shiny Orange
ULTRA LIGHTWEIGHT XC WEAPON
32 Step-Cast’s pioneering lower leg shape isn’t just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. • Wheel size: 29” • Travel: 100mm • Damper: FIT4
KEEP YOUR RIDE SMOOTH AND RELIABLE WITH THE ONEUP V2 DROPPER REBUILD KIT
Kit Includes:- 1 x SKF Midcap Assembly
- 1 x Midcap O-Ring
- 2 x Lower Bushings
- 1 x Upper Bushing
- 1 x Cartridge Spacer
- 2 x Polymer Guide Pins
- 3 x Brass Guide Pins
For the first time, we created an air spring with a truly better spring rate, everywhere in the travel, than a coil. The Secus upgrade delivers the first and only air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.
$299.00
Composure in the chaos. When the track gets wild at race speed, the 38 doesn’t flinch. Optimized for 160 to 180mm of travel with Genuine Kashima Coat, plus the Glidecore air spring reducing friction and bind substantially, the 38 sets the benchmark for single crown confidence, performance and durability.
Wheel size: 29”
Travel: 170mm
Damper: Grip X2
$2,190.00
Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. By decreasing the volume in the air canister, the shock will ramp up more quickly at the end of its travel, resisting harsh bottom-outs while still providing small-bump compliance in the top of its travel. It is critical to follow Fox’s instructions and recommendations of which spacers to use.
$49.00
SHIMANO – Seat post Dropper Lever – I-SPEC EV
With ideal ergonomics and smooth lever action, SHIMANO’s SL-MT800-IL seat post dropper lever provides quick lever access with minimal hand movement. The new I-SPEC EV lever offers a wide range of adjustments and 7mm of cable stroke. With a lightweight and compact design, the SL-MT800-IL lever sets the standard for mountain bike dropper remotes.
- Fast & effortless operation
- Quick lever access from grip position with minimum hand movement
- Light operation effort
- Compatible with common dropper posts
- 7 mm cable stroke
- I-SPEC EV type only
Short Travel. Hard Hitting. All Trail.
The lightest 36 ever, the sub-1800g 36 SL injects plushness and steering responsiveness into a true Trail fork. An evolution of the 36 chassis in 120 to 140mm of travel, the 36 SL gives modern Trail riders the confidence to go big without the weight.
• 29”
•140mm
• Grip x damper
Keep your suspension feeling new and prevent long term wear with a fresh set of seals from Racing Bros. These seals utilise graphite and Teflon to reduce friction. If you're in need of replacement seals, you'll be able to tell the difference immediately once you install these.
$29.00
Wireless.Made fastest.
Powered by Neo—the fastest wireless protocol in cycling—the new Transfer goes untethered with up to 200mm of drop. Low stack height, an ergonomic lever and an intuitive app make Transfer Neo the ultimate wireless dropper.
• Remote include
• 22.2MM / I-SPEC EV / MATCHMAKER CLAMP
• 30-40 h Battery life
high-quality CNC machined dropper lever for any cable actuated dropper post that matches the aesthetics of Hope’s Brakes. The lever rotates on ball bearings for super smooth and precise action with minimal unwanted movement and features adjustable leverage with a 20% range of adjustment.
- CNC machined
- Smooth ball bearing actuation
- Adjustable leverage
- Adjustable reach
- Works with the majority of dropper posts
- Mounts directly to Hope master cylinders via a direct shifter mount for super clean look
- Mounts with any SRAM Matchmaker or bar clamp
Set of six oversized pins.
All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.
Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.
$29.00