Product Description
$29.00
Set of six oversized pins.
All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.
Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.
In stock
Description
Follow the instructions below referencing this exploded view
– With the post still installed on bike complete the following steps
– Remove the saddle and clamps
– Wipe away any dirt or debris
– Lower the post to mid travel
– Unthread mid cap assembly (8)
– Remove Cartridge lockring (6) with needle nose pliers
– Upper tube (7) will now slide out
– Replace guide pins (10) with oversized guide pins (19) or (20) and regrease
– Reassemble in reverse order
Related Products
high-quality CNC machined dropper lever for any cable actuated dropper post that matches the aesthetics of Hope’s Brakes. The lever rotates on ball bearings for super smooth and precise action with minimal unwanted movement and features adjustable leverage with a 20% range of adjustment.
- CNC machined
- Smooth ball bearing actuation
- Adjustable leverage
- Adjustable reach
- Works with the majority of dropper posts
- Mounts directly to Hope master cylinders via a direct shifter mount for super clean look
- Mounts with any SRAM Matchmaker or bar clamp
Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit.
Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders.
210mm Dropper Post – adjustable down to 190mm
180mm Dropper Post – adjustable down to 160mm
150mm Dropper Post – adjustable down to 130mm
120mm Dropper Post – adjustable down to 100mm
Compatible with OneUp Components Dropper posts only.
$22.00
Add to cart
Changing volume spacers in the shock is an internal adjustment that allows you to change the amount of mid stroke and bottom out resistance. By decreasing the volume in the air canister, the shock will ramp up more quickly at the end of its travel, resisting harsh bottom-outs while still providing small-bump compliance in the top of its travel. It is critical to follow Fox’s instructions and recommendations of which spacers to use.
$49.00
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 32mm with NO flange. Part number 803-00-944
Suitable for all Fox 32 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
$49.00
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 2 crush washers
THE ULTIMATE ALL-MOUNTAIN WEAPON
Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders.Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. GRIP X exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency. • Wheel size: 29” • Travel: 160mm • Damper: GripX
For the first time, we created an air spring with a truly better spring rate, everywhere in the travel, than a coil. The Secus upgrade delivers the first and only air spring system to really come indistinguishably close to the linear spring rate of a coil fork for the entire first 2/3rds of its travel, with the advantage of a gentle end stroke progression to prevent bottoming without the “wall of force” harshness that excessively progressive springs create.
$299.00
Wireless.Made fastest.
Powered by Neo—the fastest wireless protocol in cycling—the new Transfer goes untethered with up to 200mm of drop. Low stack height, an ergonomic lever and an intuitive app make Transfer Neo the ultimate wireless dropper.
• Remote include
• 22.2MM / I-SPEC EV / MATCHMAKER CLAMP
• 30-40 h Battery life
Most Advanced Lightweight Trail Shock An entirely new base valve design and the addition of a valved circuit in open mode raises the already high bar for trail category performance. Factory Says It All The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, and ultra durable Genuine Kashima Coat. These products have been proven on the Downhill World Cup Circuit. Key Highlights Are • NEW graphics • X2 small bump sensitivity meets DPS lightweight and simplicity • Recirculating oil damper design for more control • Remote option • One-piece EVOL air sleeve improves responsiveness and sensitivity • Three-position lever with adjustable Open Mode • Offers 10 clicks to fine-tune compression • Imperial and metric sizes • Factory Series models feature Genuine Kashima Coat • Starting Weight 398g (includes Igus bushings, but no mounting hardware)
210 X 52.5
$399.00
Add to cart
Don’t let the weather get in the way of your big plans. The new RockShox premium ZEB short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at three points and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties.
- 3-bolt mounts make for easy installation
- Designed to integrate seemlessly and look pro with RockShox branding
- Compatible with all ZEB models
All standard steel springs are black and are marked with their spring rate in lbs/in (in 50 lbs increments) and the total travel of the spring itself. Standard black springs should only be paired with shocks having less travel than the travel marked on the spring itself.
$79.00
Replace the thru-axle on your front fork with this genuine Fox Shox replacement part. The Fox Racing Shox 15x100mm QR Thru Axle is compatible with all 32mm and 34mm Fox 15mm QR Forks.
Short Travel. Hard Hitting. All Trail.
The lightest 36 ever, the sub-1800g 36 SL injects plushness and steering responsiveness into a true Trail fork. An evolution of the 36 chassis in 120 to 140mm of travel, the 36 SL gives modern Trail riders the confidence to go big without the weight.
• 29”
•140mm
• Grip x damper
Keep The Mud Off Your Fork And Out Of Your Eyes With The Official FOX Mud Guard Designed Specifically For FOX 36, 38
$39.00
- Genuine Fox Mud Guard for 2021
- Install in minutes!
- Available in Black to suit 2021 Fox 36 or 38 only.
- Part: 803-01-441
When you need to go really big, reach for the 38.
Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability. Welcome to the big time. • Wheel size: 29” • Travel: 170mm • Damper: GripX2
SID SL ULTIMATE FOR CROSSCOUNTRY
When you ride the SID SL Ultimate, you realize that RockShox considered every detail. A stable chassis and the lightest Charger Race Day shock are a perfect pairing. Perfectly tuned for the pace needs of cross-country.
The DebonAir air spring is specifically tuned for XC needs, letting the fork maintain a higher ride height for increased confidence and control on the trail. Extremely low-friction SKF seals provide long fork performance and great responsiveness, and Maxima-Plush damping fluid reduces friction and noise.
• Wheel size: 29”
• Travel: 120mm
• Damper: Charger Race Day