Product Description
$119.00
Fox’s 1x dropper remote lever offers improved ergonomics for easier operation on the trail, and it only weighs 33.5 grams, which is 34% lighter than the old version! This remote is compatible with the Fox Transfer dropper posts, both internal and external models, as well as many other cable actuated dropper seat posts.
- New and updated 2021 Fox Transfer Remote Lever designed specifically to work with the Fox Transfer Seatpost.
- This lever is suitable for left mount, underneath the bar.
- Genuine Fox lever.
- Includes cable and housing
- Part Number: 925-06-004
- Fox Transfer setup HERE
In stock
Related Products
KEEP YOUR RIDE SMOOTH AND RELIABLE WITH THE ONEUP V2 DROPPER REBUILD KIT
Kit Includes:- 1 x SKF Midcap Assembly
- 1 x Midcap O-Ring
- 2 x Lower Bushings
- 1 x Upper Bushing
- 1 x Cartridge Spacer
- 2 x Polymer Guide Pins
- 3 x Brass Guide Pins
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimised by using a smaller wire diameter and fewer coils, creating a lighter spring.
All SLS springs are orange and are marked with their spring rate in lbs/in and the maximum travel of the shock that they are designed to be paired with.
$209.00 – $229.00
THE ULTIMATE ALL-MOUNTAIN WEAPON
Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders.Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. GRIP X exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency.
• Wheel size: 29”
• Travel: 160mm
• Damper: GripX
Most Advanced Lightweight Trail Shock An entirely new base valve design and the addition of a valved circuit in open mode raises the already high bar for trail category performance. Factory Says It All The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, and ultra durable Genuine Kashima Coat. These products have been proven on the Downhill World Cup Circuit. Key Highlights Are • NEW graphics • X2 small bump sensitivity meets DPS lightweight and simplicity • Recirculating oil damper design for more control • Remote option • One-piece EVOL air sleeve improves responsiveness and sensitivity • Three-position lever with adjustable Open Mode • Offers 10 clicks to fine-tune compression • Imperial and metric sizes • Factory Series models feature Genuine Kashima Coat • Starting Weight 398g (includes Igus bushings, but no mounting hardware)
210 X 52.5
$399.00
Add to cart
Replace the thru-axle on your front fork with this genuine Fox Shox replacement part. The Fox Racing Shox 15x100mm QR Thru Axle is compatible with all 32mm and 34mm Fox 15mm QR Forks.
Composure in the chaos. When the track gets wild at race speed, the 38 doesn’t flinch. Optimized for 160 to 180mm of travel with Genuine Kashima Coat, plus the Glidecore air spring reducing friction and bind substantially, the 38 sets the benchmark for single crown confidence, performance and durability.
Wheel size: 29”
Travel: 170mm
Damper: Grip X2
$2,190.00
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 32mm with NO flange. Part number 803-00-944
Suitable for all Fox 32 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
$49.00
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 2 crush washers
THE ULTIMATE ALL-MOUNTAIN WEAPON
Packed with features to dominate the descents, the 36 answers the call from aggressive all-mountain riders.Trail and all-mountain riders no longer need to choose between a descent-focused damper or a lightweight endurance damper. GRIP X exudes exemplary descent performance, refined for less weight, easier set up and an easy access firm mode for pedaling efficiency. • Wheel size: 29” • Travel: 160mm • Damper: GripX
Short Travel. Hard Hitting. All Trail.
The lightest 36 ever, the sub-1800g 36 SL injects plushness and steering responsiveness into a true Trail fork. An evolution of the 36 chassis in 120 to 140mm of travel, the 36 SL gives modern Trail riders the confidence to go big without the weight.
• 29”
•140mm
• Grip x damper
The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. Includes cable and housing. It's the easiest way to upgrade any mechanical dropper.
$109.00
- 1x Remote body
- 1x Black thumb cushion (colours sold seperately)
- Cable, housing, cable end & barrel end
Don’t let the weather get in the way of your big plans. The new RockShox premium ZEB short fender is designed to keep you dry and clean when the weather turns. It can be easily installed at three points and looks as if your fork and fender are one, leaving your friends wondering why they are still messing around with zip ties.
- 3-bolt mounts make for easy installation
- Designed to integrate seemlessly and look pro with RockShox branding
- Compatible with all ZEB models
Keep your suspension feeling new and prevent long term wear with a fresh set of seals from Racing Bros. These seals utilise graphite and Teflon to reduce friction. If you're in need of replacement seals, you'll be able to tell the difference immediately once you install these.
$29.00
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 34mm with NO flange. Part number 803-00-945
Suitable for all Fox 34 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
$69.00
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 3 crush washers
SHIMANO – Seat post Dropper Lever – I-SPEC EV
With ideal ergonomics and smooth lever action, SHIMANO’s SL-MT800-IL seat post dropper lever provides quick lever access with minimal hand movement. The new I-SPEC EV lever offers a wide range of adjustments and 7mm of cable stroke. With a lightweight and compact design, the SL-MT800-IL lever sets the standard for mountain bike dropper remotes.
- Fast & effortless operation
- Quick lever access from grip position with minimum hand movement
- Light operation effort
- Compatible with common dropper posts
- 7 mm cable stroke
- I-SPEC EV type only
It is important to have the right tool for the job. It not only will make the job easier, but it will keep you from damaging costly parts. The Fox Shox Seal Driver Tool is designed to perfectly drive Fox fork wiper seals with ease. These drivers will work on both flanged seals and the new low friction seals without flanges.