Product Description
$119.00
Fox’s 1x dropper remote lever offers improved ergonomics for easier operation on the trail, and it only weighs 33.5 grams, which is 34% lighter than the old version! This remote is compatible with the Fox Transfer dropper posts, both internal and external models, as well as many other cable actuated dropper seat posts.
- New and updated 2021 Fox Transfer Remote Lever designed specifically to work with the Fox Transfer Seatpost.
- This lever is suitable for left mount, underneath the bar.
- Genuine Fox lever.
- Includes cable and housing
- Part Number: 925-06-004
- Fox Transfer setup HERE
In stock
Related Products
SID SL ULTIMATE FOR CROSSCOUNTRY
When you ride the SID SL Ultimate, you realize that RockShox considered every detail. A stable chassis and the lightest Charger Race Day shock are a perfect pairing. Perfectly tuned for the pace needs of cross-country.
The DebonAir air spring is specifically tuned for XC needs, letting the fork maintain a higher ride height for increased confidence and control on the trail. Extremely low-friction SKF seals provide long fork performance and great responsiveness, and Maxima-Plush damping fluid reduces friction and noise.
• Wheel size: 29”
• Travel: 120mm
• Damper: Charger Race Day
When you need to go really big, reach for the 38.
Building on a legacy of Enduro dominance, the Limited Edition 38 Racing Green pays homage to a century of auto racing. Optimized for 170mm of travel and featuring Grip X2 damping, this fork redefines what a long-travel single crown can do, setting a new benchmark for confidence, capability, and durability. • Wheel size: 29” • Travel: 170mm • Damper: GripX2
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 32mm with NO flange. Part number 803-00-944
Suitable for all Fox 32 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
$49.00
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 2 crush washers
It is important to have the right tool for the job. It not only will make the job easier, but it will keep you from damaging costly parts. The Fox Shox Seal Driver Tool is designed to perfectly drive Fox fork wiper seals with ease. These drivers will work on both flanged seals and the new low friction seals without flanges.
Set of six oversized pins.
All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.
Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.
$29.00
Composure in the chaos. When the track gets wild at race speed, the 38 doesn’t flinch. Optimized for 160 to 180mm of travel with Genuine Kashima Coat, plus the Glidecore air spring reducing friction and bind substantially, the 38 sets the benchmark for single crown confidence, performance and durability.
Wheel size: 29”
Travel: 170mm
Damper: Grip X2
$2,190.00
The ultimate all-mountain weapon
The latest evolution of the revered 36 brings big fork energy to All-Mountain riding. Greater steering stiffness and smoother travel give the 36 an Enduro feel, without the weight.
• Wheel size: 29”
• Travel: 160mm
• Damper: GripX2
Replace the thru-axle on your front fork with this genuine Fox Shox replacement part. The Fox Racing Shox 15x100mm QR Thru Axle is compatible with all 32mm and 34mm Fox 15mm QR Forks.
When you need to go really big, reach for the 38.
Optimized for 160-180mm of travel, the 38 redefines capability of a long travel single crown fork, setting a new benchmark for confidence, performance, and durability. Welcome to the big time. • Wheel size: 29” • Travel: 170mm • Damper: GripX2
Wireless.Made fastest.
Powered by Neo—the fastest wireless protocol in cycling—the new Transfer goes untethered with up to 200mm of drop. Low stack height, an ergonomic lever and an intuitive app make Transfer Neo the ultimate wireless dropper.
• Remote include
• 22.2MM / I-SPEC EV / MATCHMAKER CLAMP
• 30-40 h Battery life
Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit.
Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders.
210mm Dropper Post – adjustable down to 190mm
180mm Dropper Post – adjustable down to 160mm
150mm Dropper Post – adjustable down to 130mm
120mm Dropper Post – adjustable down to 100mm
Compatible with OneUp Components Dropper posts only.
$22.00
Add to cart
KEEP YOUR RIDE SMOOTH AND RELIABLE WITH THE ONEUP V2 DROPPER REBUILD KIT
Kit Includes:- 1 x SKF Midcap Assembly
- 1 x Midcap O-Ring
- 2 x Lower Bushings
- 1 x Upper Bushing
- 1 x Cartridge Spacer
- 2 x Polymer Guide Pins
- 3 x Brass Guide Pins
THE MASTER OF ALL-MOUNTAIN
From aggressive trail to enduro, the advanced damping, fade free performance and class-leading durability of FLOAT X makes it the versatile and lightweight choice for All-Mountain riders earning their descents. • 230 × 60mm • Tool free compression and rebound adjustment • EVOL Air sleeve
Keep Your Ride Smooth And Reliable With The OneUp V2 Dropper Rebuild Kit
The V2.1 Dropper Rebuild Kit is an updated rebuild kit for the OneUp V2 Dropper Post with an updated midcap assembly and new ultra-low friction SKF® seals. This Kit does 30.9,31.6 and 34.9mm diameters Includes:- 1 x SKF® Midcap Assembly
- 1 x Upper Bushing
- 1 x Lower Bushing
- 3 x Brass Pins
Most Advanced Lightweight Trail Shock An entirely new base valve design and the addition of a valved circuit in open mode raises the already high bar for trail category performance. Factory Says It All The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, and ultra durable Genuine Kashima Coat. These products have been proven on the Downhill World Cup Circuit. Key Highlights Are • NEW graphics • X2 small bump sensitivity meets DPS lightweight and simplicity • Recirculating oil damper design for more control • Remote option • One-piece EVOL air sleeve improves responsiveness and sensitivity • Three-position lever with adjustable Open Mode • Offers 10 clicks to fine-tune compression • Imperial and metric sizes • Factory Series models feature Genuine Kashima Coat • Starting Weight 398g (includes Igus bushings, but no mounting hardware)
210 X 52.5
$399.00
Add to cart