Fox Racing Fork Low Friction Dust Wiper Kit 32mm – No Flange

Most Advanced Lightweight Trail Shock An entirely new base valve design and the addition of a valved circuit in open mode raises the already high bar for trail category performance. Factory Says It All The best-of-the-best technology we have to offer is available in our Factory Series models with our buttery smooth, and ultra durable Genuine Kashima Coat. These products have been proven on the Downhill World Cup Circuit. Key Highlights Are • NEW graphics • X2 small bump sensitivity meets DPS lightweight and simplicity • Recirculating oil damper design for more control • Remote option • One-piece EVOL air sleeve improves responsiveness and sensitivity • Three-position lever with adjustable Open Mode • Offers 10 clicks to fine-tune compression • Imperial and metric sizes • Factory Series models feature Genuine Kashima Coat • Starting Weight 398g (includes Igus bushings, but no mounting hardware) 210 X 52.5

The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. Includes cable and housing. It's the easiest way to upgrade any mechanical dropper.

• 1x Remote body
• 1x Black thumb cushion (colours sold seperately)
• Cable, housing, cable end & barrel end

Note: Bar Clamps and Adapters are sold separately.

Set of six oversized pins. All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike. Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.

• Remote Lockout: Yes

Keep your suspension feeling new and prevent long term wear with a fresh set of seals from Racing Bros. These seals utilise graphite and Teflon to reduce friction. If you're in need of replacement seals, you'll be able to tell the difference immediately once you install these.

Don’t get stuck between dropper sizes. The unique OneUp travel adjust shims allow you to custom tune your OneUp Components Dropper post by lowering the travel and extended length of your post by either 10mm or 20mm. A 180mm travel post can be reduced in travel to either 170mm or 160mm with this shim kit. Drop tuning can be done on-bike, tool free and without removing the saddle or touching a shock pump. Lowering the post travel also increases bushing overlap and alignment pin length, which is great for heavier riders. 210mm Dropper Post – adjustable down to 190mm 180mm Dropper Post – adjustable down to 160mm 150mm Dropper Post – adjustable down to 130mm 120mm Dropper Post – adjustable down to 100mm   Compatible with OneUp Components Dropper posts only.    

SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimised by using a smaller wire diameter and fewer coils, creating a lighter spring. All SLS springs are orange and are marked with their spring rate in lbs/in and the maximum travel of the shock that they are designed to be paired with. 

High-quality CNC machined dropper lever for any cable actuated dropper post that matches the aesthetics of Hope’s Brakes. The lever rotates on ball bearings for super smooth and precise action with minimal unwanted movement and features adjustable leverage with a 20% range of adjustment.

• CNC machined
• Smooth ball bearing actuation
• Adjustable leverage
• Adjustable reach
• Works with the majority of dropper posts
• Mounts directly to Hope master cylinders via a direct shifter mount for super clean look
• Mounts with any SRAM Matchmaker or bar clamp