Product Description
$159.95
High-quality CNC machined dropper lever for any cable actuated dropper post that matches the aesthetics of Hope’s Brakes. The lever rotates on ball bearings for super smooth and precise action with minimal unwanted movement and features adjustable leverage with a 20% range of adjustment.
- CNC machined
- Smooth ball bearing actuation
- Adjustable leverage
- Adjustable reach
- Works with the majority of dropper posts
- Mounts directly to Hope master cylinders via a direct shifter mount for super clean look
- Mounts with any SRAM Matchmaker or bar clamp
Only 1 left in stock
Be the first to review “Dropper Lever Hope SILVER/SILVER”
You must be logged in to post a review.
Related Products
The ultimate all-mountain weapon
The latest evolution of the revered 36 brings big fork energy to All-Mountain riding. Greater steering stiffness and smoother travel give the 36 an Enduro feel, without the weight.
• Wheel size: 29”
• Travel: 160mm
• Damper: GripX2
KEEP YOUR RIDE SMOOTH AND RELIABLE WITH THE ONEUP V2 DROPPER REBUILD KIT
Kit Includes:- 1 x SKF Midcap Assembly
- 1 x Midcap O-Ring
- 2 x Lower Bushings
- 1 x Upper Bushing
- 1 x Cartridge Spacer
- 2 x Polymer Guide Pins
- 3 x Brass Guide Pins
Keep your suspension feeling new and prevent long term wear with a fresh set of seals from Racing Bros. These seals utilise graphite and Teflon to reduce friction. If you're in need of replacement seals, you'll be able to tell the difference immediately once you install these.
$29.00
THE MASTER OF ALL-MOUNTAIN
From aggressive trail to enduro, the advanced damping, fade free performance and class-leading durability of FLOAT X makes it the versatile and lightweight choice for All-Mountain riders earning their descents. • 230 × 60mm • Tool free compression and rebound adjustment • EVOL Air sleeve
Keep Your Ride Smooth And Reliable With The OneUp V2 Dropper Rebuild Kit
The V2.1 Dropper Rebuild Kit is an updated rebuild kit for the OneUp V2 Dropper Post with an updated midcap assembly and new ultra-low friction SKF® seals. This Kit does 30.9,31.6 and 34.9mm diameters Includes:- 1 x SKF® Midcap Assembly
- 1 x Upper Bushing
- 1 x Lower Bushing
- 3 x Brass Pins
SLS (Super Light Steel) springs are now available from FOX for DHX and VAN rear shocks. These SLS springs are a lighter weight steel spring option offered in addition to our standard steel springs. The new SLS springs from FOX are lighter than titanium springs at more affordable prices. A proprietary surface treatment and stress relief process removes residual stresses from the spring, allowing them to withstand higher stresses. Each spring is optimised by using a smaller wire diameter and fewer coils, creating a lighter spring.
All SLS springs are orange and are marked with their spring rate in lbs/in and the maximum travel of the shock that they are designed to be paired with.
$209.00 – $229.00
Fox’s 1x dropper remote lever offers improved ergonomics for easier operation on the trail, and it only weighs 33.5 grams, which is 34% lighter than the old version! This remote is compatible with the Fox Transfer dropper posts, both internal and external models, as well as many other cable actuated dropper seat posts.
- New and updated 2021 Fox Transfer Remote Lever designed specifically to work with the Fox Transfer Seatpost.
- This lever is suitable for left mount, underneath the bar.
- Genuine Fox lever.
- Includes cable and housing
- Part Number: 925-06-004
- Fox Transfer setup HERE
Set of six oversized pins.
All dropper posts require key way clearance. With so many different frames, clamps and ride heights it’s not possible to ship play-free without running the risk of binding. The kit is meant to remove additional play that might develop over time or, for the more mechanically inclined, to tune the play out for a specific bike.
Start with the 3 pins marked with 2 lines. If play still exists move to the 3 pins marked with 4 lines.
$29.00
high-quality CNC machined dropper lever for any cable actuated dropper post that matches the aesthetics of Hope’s Brakes. The lever rotates on ball bearings for super smooth and precise action with minimal unwanted movement and features adjustable leverage with a 20% range of adjustment.
- CNC machined
- Smooth ball bearing actuation
- Adjustable leverage
- Adjustable reach
- Works with the majority of dropper posts
- Mounts directly to Hope master cylinders via a direct shifter mount for super clean look
- Mounts with any SRAM Matchmaker or bar clamp
Composure in the chaos. When the track gets wild at race speed, the 38 doesn’t flinch. Optimized for 160 to 180mm of travel with Genuine Kashima Coat, plus the Glidecore air spring reducing friction and bind substantially, the 38 sets the benchmark for single crown confidence, performance and durability.
Wheel size: 29”
Travel: 170mm
Damper: Grip X2
$2,190.00
The V3 Dropper Remote is a lighter action remote with a replaceable rubber thumb pad and integrated cable port. Available in 7 colours, all major clamp standards and as a remote only option so you can reuse your existing V2 clamp. Includes cable and housing. It's the easiest way to upgrade any mechanical dropper.
$109.00
- 1x Remote body
- 1x Black thumb cushion (colours sold seperately)
- Cable, housing, cable end & barrel end
WELCOME TO THE CORONATION. THE UNDISPUTED ALL-MOUNTAIN CHAMPION GETS A NEW CROWN.
For MY23 the FOX 36 receives an update in the form of a new crown with updated design and engineering for more steer tube overlap improving durability and maintaining stiffness while dropping 20 grams.- Spring: EVOL air spring.
- Dampers: GRIP 2, external HSC / LSC and HSR / LSR.
- Lowers: 15mm x 110mm QR
- Wheel size: 29″
- Offset: 44mm
- Travel: 160mm
- Colour: Shiny Orange
Keep The Mud Off Your Fork And Out Of Your Eyes With The Official FOX Mud Guard Designed Specifically For FOX 36, 38
$39.00
- Genuine Fox Mud Guard for 2021
- Install in minutes!
- Available in Black to suit 2021 Fox 36 or 38 only.
- Part: 803-01-441
Fox Racing Fork Dust Wiper/Foam ring Kit - Latest version, Low Friction, 34mm with NO flange. Part number 803-00-945
Suitable for all Fox 34 models. Past and Present
Genuine Fox Racing fork dust wiper/foam ring kit, increases durability and extends service life. New Improved Low friction performance seal designed with a dual lip wiper to keep contaminates out. New foam rings to lubricate fork inside. Note - These new flangeless dust seals are best installed using the correct seal driver tool, as recommended by Fox.
Kit includes:
$69.00
- 2 Dust wiper / oil seals
- 2 Foam lubricating rings
- 3 crush washers
Reviews
There are no reviews yet.